These BBK shorty Dodge exhaust headers are made using 1-5/8" CNC-mandrel bent primary tubing along with 3/8" thick laser cut exhaust flanges to prevent heat distortion. The full length primary tube design creates unrestricted and balanced exhaust flow for ultimate horsepower gains. These headers are also individually pressure tested to ensure leak free performance. Extract maximum performance from your 2005-2010 Dodge Charger or 2009-2010 Dodge Challenger 3.5L V6 when you install a set of these BBK Performance shorty headers. BBK shorty headers will increase your exhaust flow and provide additional horsepower and torque.

BBK Performance throttle bodies are designed as a direct replacement for the restrictive stock factory throttle body. All BBK Power Plus throttle bodies offer OEM drive ability but with up to 30% improved airflow for improved horsepower, torque and throttle response. Every BBK throttle body is CNC Machined from a new high quality 356 aluminum casting and assembled with features like OEM style die stamped throttle linkages, double sealed bearings, and o ringed throttle shafts to make every BBK throttle body the best on the market today. All BBK Performance throttle bodies are designed to improve performance and they work with the vehicles factory tune. No tune is required and BBK throttle bodies are available for many late model American muscle cars and trucks.

Throttle body gaskets can deteriorate and dry out over time and cause air or coolant leaks causing drive ability issues. They should be replaced every time the throttle body has undergone any replacement, repair or service. All throttle body gaskets should be changed when you suspect or there is evidence of a leak. BBK Performance throttle body gaskets are made from high quality gasket materials to last and for the most part are a relatively simple installation These Premium Quality Gasket Sets are the same ones included with all of our Power plus series throttle bodies and can be used for most stock and aftermarket installations. Available for most popular late model EFI applications including Mustang, Camaro, Firebird, Corvette, Ford F Series and GM truck as well as many Jeep and Import applications.

A BBK Performance Mustang strut tower brace helps stiffen up the front end of any Ford Mustang by joining the front strut shock towers together. This transmits the load of each strut tower during cornering reduces chassis flex which improves front end geometry and steering on all Ford Mustangs. These braces are manufactured using super stiff steel tubing and they are available in or powder chrome or Black Powder coat finishes. All kits include all required hardware and brackets where required to help improve the performance handling of your Ford Mustang.

This great looking BBK Performance cold air intake kit has been designed as a direct replacement for the restrictive factory intake and installs with few simple hand tools in less than an hour - This air intake kit will improve your horsepower, torque and throttle response right out of the box. All BBK cold air kits are designed to pull cooler denser air into the intake for improved overall power. All Kits include high flow Inlet tube, high flow washable cotton element air filter and all required shields, mounts, clamps, hardware and installation Instructions.

BBK Performance have designed these oil separator kits specifically for late model EFI car or truck applications. An Oil Separator will keep oil out of your intake for a cleaner fuel burn and improved performance. This BBK Oil Separator Kit is CNC machined from solid billet aluminum. The oil collection tank features a knurled base for easy removal to drain the captured oil and an O-ring seal to prevent leaks. A high efficiency, multi-stage filter system is used to collect the very fine oil vapor droplets and deposit them into the easily removable bottom. This ensures only clean, oil-free air is able to pass through into the intake Installation Of this BBK Oil Separator Kit can be done with simple hand tools in less that 30 minutes.

BBK Performance throttle bodies are designed as a direct replacement for the restrictive stock factory throttle body. All BBK Power Plus throttle bodies offer OEM drive ability but with up to 30% improved airflow for improved horsepower, torque and throttle response. Every BBK throttle body is CNC Machined from a new high quality 356 aluminum casting and assembled with features like OEM style die stamped throttle linkages, double sealed bearings, and o ringed throttle shafts to make every BBK throttle body the best on the market today. All BBK Performance throttle bodies are designed to improve performance and they work with the vehicles factory tune. Will Not Fit:17-23 Jeep Applications or Dodge RAM 3.6 Classic Truck Applications (5Lug) or 19-23 Dodge RAM DT (6lug)

Replace the flimsy factory live axle Mustang rear control arms with a set of these popular BBK rear lower control arms. Manufactured from heavy gauge steel plate using precision welds, these BBK Performance heavy duty Mustang lower control arms will "Hook You Up" on the track and on the street. These rear control arm kits will greatly improve your ET's and 60ft times and best of all they are a direct swap for the factory units. These control arms will give you better handling and cornering characteristics because of their design and super stiff boxed steel tubing and polyurethane bushings.

BBK Performance throttle bodies are designed as a direct replacement for the restrictive stock factory throttle body. All BBK Power Plus throttle bodies offer OEM drive ability but with up to 30% improved airflow for improved horsepower, torque and throttle response. Every BBK throttle body is CNC Machined from a new high quality 356 aluminum casting and assembled with features like OEM style die stamped throttle linkages, double sealed bearings, and o ringed throttle shafts to make every BBK throttle body the best on the market today. All BBK Performance throttle bodies are designed to improve performance and they work with the vehicles factory tune. No tune is required and BBK throttle bodies are available for many late model American muscle cars and trucks.

This great looking BBK Performance cold air intake kit has been designed as a direct replacement for the restrictive factory intake and installs with few simple hand tools in less than an hour - This air intake kit will improve your horsepower, torque and throttle response right out of the box. All BBK cold air kits are designed to pull cooler denser air into the intake for improved overall power. All Kits include high flow Inlet tube, high flow washable cotton element air filter and all required shields, mounts, clamps, hardware and installation Instructions.

Mustang subframe connectors should be one of the first modifications you make to your car. These full Length BBK subframe connectors will increase the chassis stiffness and increase the strength of the unibody to make the rest of your Mustang suspension function properly for better handling and ride quality. These full Length Mustang subframe connectors are available in standard style or with seat brackets for additional strength. All subframe kits are powder coated for protection against the elements can be bolted or welded in place.

When you install a set of BBK Performance long tube exhaust headers on your muscle car or truck, the O2 sensor locations are relocated on the BBK header and mid pipe. The factory O2 sensor wire connectors will not be long enough to connect to the sensors any longer.. These extension harnesses extend the length needed and allow them to now connect easily - All our extension harnesses feature OEM Factory connectors to allow simple plug in installation to the factory wire harness so that the relocation is super simple and does not require any splicing of the factory harness at all. (Sold in Pairs)