The Four Seasons Aluminum Filter Drier w/o Pad Mount (part number 83214) is a direct-fit replacement built to match the original equipment part.
Features:
- Our accumulator / filter driers feature quality welds for a durable, leak-free design in addition to high-quality desiccant for appropriate absorption. For easy installation, necessary gaskets, o-rings and seal are included as well.
- The accumulator / filter drier acts as a filter by removing moisture and contaminants from the air conditioning system. Such contaminants cannot be removed by flushing, therefore replacing the accumulator / filter drier is essential.
- The absorption of moisture in the system is done through the use of a desiccant bag. A leaking or "open" system can cause the bag to become saturated within a few hours making the accumulator/filter drier ineffective.
- Replacement of the accumulator / filter drier is required to validate compressor warranty and must be replaced anytime the system is serviced.
Specifications:
| Bracket? | w/o Bracket |
| Description | Filter Driers |
| Desiccant Included? | Yes |
| Desiccant Replaceable | Not Replaceable |
| Dia. IN | 2.500 |
| Dia. MM | 63.5 |
| Gasket or Seal Included | Included |
| In Fltr Fitt Typ Gen | Female |
| Inlet Dia. IN | .413 |
| Inlet Type | Pad Mount |
| Length IN | 10.5 |
| Length MM | 266.7 |
| Material | Aluminum |
| Mounting Hardware Included | Not Included |
Interchanges With: General Motors 52479126, UAC RD3915C, Pro Source 83214, Ranshu 172975, ACDelco 151804, General Motors 52479110, Nissens 95235, Compressor Works 3709092 and 12 more
WARNING: This product contains a chemical known to the State of California to cause cancer and birth defects or other reproductive harm.
