The Four Seasons Aluminum Filter Drier w/o Pad Mount (part number 83256) is a direct-fit replacement built to match the original equipment part.
Features:
- Our accumulator / filter driers feature quality welds for a durable, leak-free design in addition to high-quality desiccant for appropriate absorption. For easy installation, necessary gaskets, o-rings and seal are included as well.
- The accumulator / filter drier acts as a filter by removing moisture and contaminants from the air conditioning system. Such contaminants cannot be removed by flushing, therefore replacing the accumulator / filter drier is essential.
- The absorption of moisture in the system is done through the use of a desiccant bag. A leaking or "open" system can cause the bag to become saturated within a few hours making the accumulator/filter drier ineffective.
- Replacement of the accumulator / filter drier is required to validate compressor warranty and must be replaced anytime the system is serviced.
Specifications:
| Bracket? | w/ Bracket |
| Connector B Type | Pad Mount |
| Connector Type | P-Nut |
| Description | Filter Driers |
| Desiccant Included? | Yes |
| Desiccant Replaceable | Not Replaceable |
| Dia. IN | 2.250 |
| Dia. MM | 57.15 |
| Gasket or Seal Included | Included |
| In Fltr Fitt Typ Gen | P-Nut |
| Inlet Dia. IN | .337 |
| Inlet Type | P-Nut Fitting |
| Length IN | 6.125 |
| Length MM | 155.57 |
Interchanges With: Ranshu 173018, NAPA Temp A87256, Saab 24418370, Compressor Works 708284, Global Parts Distributors LLC 1411900, Compressor Works T83256, Nissens 95339, Pro Source 83256 and 9 more
WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.
