The Four Seasons Aluminum Filter Drier w/ Pad Mount (part number 83041) is a direct-fit replacement for 2000-2006 Ford, Jaguar, and Lincoln vehicles with engines.
Features:
- Our accumulator / filter driers feature quality welds for a durable, leak-free design in addition to high-quality desiccant for appropriate absorption. For easy installation, necessary gaskets, o-rings and seal are included as well.
- The accumulator / filter drier acts as a filter by removing moisture and contaminants from the air conditioning system. Such contaminants cannot be removed by flushing, therefore replacing the accumulator / filter drier is essential.
- The absorption of moisture in the system is done through the use of a desiccant bag. A leaking or "open" system can cause the bag to become saturated within a few hours making the accumulator/filter drier ineffective.
- Replacement of the accumulator / filter drier is required to validate compressor warranty and must be replaced anytime the system is serviced.
Specifications:
| Connector B Type | Pad Mount |
| Connector Type | Pad Mount |
| Description | Filter Driers |
| Desiccant Included? | Yes |
| Desiccant Replaceable | Not Replaceable |
| Dia. IN | 3.000 |
| Dia. MM | 76.2 |
| Gasket or Seal Included | Included |
| In Fltr Fitt Typ Gen | Pad Mount |
| Inlet Dia. IN | 0.375 |
| Inlet Fraction | 3/8 |
| Inlet IN | 0.375 |
| Inlet MM | 10 |
| Inlet Type | Pad Mount |
Fits: 2000-2006 Ford, Jaguar, and Lincoln models including Thunderbird, S-Type, LS. Confirm your year, make, model, and engine before ordering.
Interchanges With: Motorcraft YL176, Nissens 95761, Autopart International CWK705118, Ford XW4Z19959BA, Compressor Works 210150, General Motors 19193696, Balkamp 408513, Pro Source 83041 and 17 more
WARNING: This product contains a chemical known to the State of California to cause cancer and birth defects or other reproductive harm.
