The Four Seasons Steel Filter Drier (part number 33738) is a direct-fit replacement built to match the original equipment part.
Features:
- Our accumulator / filter driers feature quality welds for a durable, leak-free design in addition to high-quality desiccant for appropriate absorption. For easy installation, necessary gaskets, o-rings and seal are included as well.
- The accumulator / filter drier acts as a filter by removing moisture and contaminants from the air conditioning system. Such contaminants cannot be removed by flushing, therefore replacing the accumulator / filter drier is essential.
- The absorption of moisture in the system is done through the use of a desiccant bag. A leaking or "open" system can cause the bag to become saturated within a few hours making the accumulator/filter drier ineffective.
- Replacement of the accumulator / filter drier is required to validate compressor warranty and must be replaced anytime the system is serviced.
Specifications:
| Bracket? | w/o Bracket |
| Connector B Type | Male Insert O-Ring |
| Connector Type | Male Insert O-Ring |
| Description | Filter Driers |
| Desiccant Included? | Yes |
| Desiccant Replaceable | Not Replaceable |
| Dia. IN | 3.000 |
| Dia. MM | 76 |
| Fitt Thrd Dia IN | 0.625 |
| Fuse Plug? | No |
| Gasket or Seal Included | Included |
| In Fltr Fitt Typ Gen | Male |
| Inlet Dia. IN | 0.625 |
| Inlet Fraction | 5/8 |
Interchanges With: NAPA Temp 208299, UAC RD10997C, Global Parts Distributors LLC 1411731, Global Parts Distributors LLC 1411919, NAPA Temp A1805, Pro Source 33738, Balkamp 936079, Compressor Works 708341 and 3 more
WARNING: This product contains a chemical known to the State of California to cause cancer and birth defects or other reproductive harm.
