The Four Seasons Steel Filter Drier (part number 33910) is a direct-fit replacement built to match the original equipment part.
Features:
- Our accumulator / filter driers feature quality welds for a durable, leak-free design in addition to high-quality desiccant for appropriate absorption. For easy installation, necessary gaskets, o-rings and seal are included as well.
- The accumulator / filter drier acts as a filter by removing moisture and contaminants from the air conditioning system. Such contaminants cannot be removed by flushing, therefore replacing the accumulator / filter drier is essential.
- The absorption of moisture in the system is done through the use of a desiccant bag. A leaking or "open" system can cause the bag to become saturated within a few hours making the accumulator/filter drier ineffective.
- Replacement of the accumulator / filter drier is required to validate compressor warranty and must be replaced anytime the system is serviced.
Specifications:
| Bracket? | w/ Bracket |
| Description | Filter Driers |
| Desiccant Included? | Yes |
| Desiccant Replaceable | Not Replaceable |
| Dia. IN | 6.22 |
| Dia. MM | 157.99 |
| Fuse Plug? | No |
| Gasket or Seal Included | Included |
| In Fltr Fitt Typ Gen | Female |
| Inlet Dia. IN | .414 |
| Inlet Fraction | 7/16 |
| Inlet IN | 0.41 |
| Inlet MM | 10.52 |
| Length IN | 6.22 |
Interchanges With: John Deere AL220729, Murray 33910, NAPA Temp A78909, NAPA Temp 408919, Compressor Works 708366, Global Parts Distributors LLC 1412047, Pro Source 33910
WARNING: This product contains a chemical known to the State of California to cause cancer and birth defects or other reproductive harm.
