The Enginetech EM4441 exhaust valve features a 1.236" head diameter, 0.2346" stem (6mm nominal), and 4.795" overall length with a nitride-hardened stem. Fits 1999-2012 Saab/Subaru 2.2L/2.5L applications.
Important Notes
- Sold individually as a single valve. Order the quantity required for your engine configuration (typically one per cylinder per valve position).
- Nitride-hardened stem surface resists wear and galling in high-temperature and high-load applications.
- Always verify head diameter, stem diameter, overall valve length, and groove count against the OE valve being replaced before installation - valve dimensions vary across engine families and a visual match alone is not sufficient.
Specifications
| Part Number | EM4441 |
| Valve Type | Exhaust Valve |
| Head Diameter | 1.236" |
| Stem Diameter | 0.2346" (6mm nominal) |
| Valve Length | 4.795" OAL |
| Stem Finish | Nitrided Stem |
| Number of Grooves | 1 |
| Weight | 0.25 lbs |
| OEM Cross-Refs | DNJ Rock: EV710, Elgin: E5169, Melling: V5807, Safety: VX412, SBI: 10807, Subaru: 13202AA371 |
Vehicle Fitment
- 2005-2006 Saab 2.5L / 2457 SOHC H4 16V Subaru EJ253 99.50mm Bore
- 1999-2001 Subaru 2.2L / 2212 SOHC H4 16V EJ22, 222 96.90mm Bore
- 1999 Subaru 2.5L / 2457 DOHC H4 16V EJ25D 99.50mm Bore
- 1999-2012 Subaru 2.5L / 2457 SOHC H4 16V EJ251, 252, 253, 259 99.50mm Bore
- 2003-2006 Subaru 2.5L / 2457 SOHC H4 16V EJ253 99.50mm Bore
Product Video
Watch the Enginetech exhaust valve overview: https://youtu.be/G487Dw8HtII
Watch the Enginetech exhaust valve overview: https://youtu.be/eLaQHop7rH8
Enginetech standard valves are stock-replacement engine valves produced from OE grade materials or better, engineered with the production engine rebuilder in mind. Face runout, stem finish, and stem diameter tolerances are held to some of the tightest standards in the internal engine parts industry, and every valve is inspected by on-site engineers against a documented quality plan before it leaves the plant. The line covers domestic, import, and common high-performance applications across a full range of head diameters, stem diameters, and overall lengths, with chrome-plated and nitride-hardened stem finishes available where the engine's operating conditions call for the upgrade. Always verify head diameter, stem diameter, valve length, groove count, and any oversize stem requirement against the original valve being replaced before installing, as multiple valve configurations can share the same vehicle nameplate.
WARNING: This product can expose you to chemicals including lead and nickel, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
