The Enginetech EB024-4 is a set of bronze (copper/lead alloy) piston pin bushings supplied as a 4 pack. Fits 1998-2016 Honda/Lexus/Toyota 2.3L/5.7L applications.
Important Notes
- Sold as a 4 Pack (4 bushings). IMPORTANT: this application requires TWO bushings per connecting rod, so a 4-pack covers 2 rods. Order a second pack if rebuilding a full 4-cylinder engine.
- Supplied semi-finished on the inside diameter: the bushing ID must be final-reamed or honed to match the wrist pin after pressing into the connecting rod small end. This is a standard machine-shop operation and establishes the running clearance on the pin.
- Bronze (copper/lead alloy) construction matches OE material spec for durability and anti-seizure performance under high cyclic loads at the rod small end.
- Per OE specification this engine uses two piston pin bushings per connecting rod. Count the bushings in the rod being serviced before ordering quantity.
- Direct OEM cross-reference replacement - see the OEM Cross-References section below for matching part numbers.
- Always verify the OE bushing ID, OD, length, and rod part number against the original bushing being replaced before installation. Dimensions vary across engine families even when sharing similar makes or displacements.
Specifications
| Part Number | EB024-4 |
| Product Type | Piston Pin Bushing |
| Material | Bronze (copper/lead alloy) |
| Inside Diameter | Semi-finished (ream to fit) |
| Pack Count | 4 |
| Engine Configuration | V8 (pack = complete set) |
| Per Rod | 2 bushings required |
| Weight | 0.25 lbs |
| UPC | 707473921206 |
| Country of Origin | TW |
| OEM Cross-References | Topline: PBH36 |
Vehicle Fitment
- 1998 Honda Odyssey 2.3L I4 SOHC
- 1998-2002 Honda Accord 2.3L I4 SOHC
- 1998-2002 Honda Accord 2.3L I4 SOHC
- 1998-2002 Honda Accord 2.3L I4 SOHC
- 2007-2016 Toyota Tundra 5.7L 345ci V8 DOHC
- 2008-2011, 2013 Lexus LX570 5.7L 345ci V8 DOHC
- 2008-2011, 2013 Toyota Land Cruiser 5.7L 345ci V8 DOHC
- 2008-2013 Toyota Sequoia 5.7L 345ci V8 DOHC
- 2009-2013 Toyota Sequoia 5.7L 345ci V8 DOHC
- 2009-2016 Toyota Tundra 5.7L 345ci V8 DOHC
Enginetech Piston Pin Bushings are a copper/lead alloy bronze, cast to OE-equivalent specification for connecting rod small-end service. These bushings are supplied semi-finished on the inside diameter, meaning the ID must be final-reamed or honed to match the wrist pin after the bushing has been pressed into the rod - a standard rebuild-shop operation that ensures a precise running clearance on the piston pin. Each part number is engineered against the specific rod, pin, and bushing seat geometry of the listed applications, so cross-reference verification against the OEM part number is essential before installation.
WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer, birth defects, or other reproductive harm.
