The Enginetech V2231 exhaust valve features a 1.576" head diameter, 0.3421" stem (11/32" nominal), and 8.497" overall length with Inconel-faced severe-service construction. Fits Detroit Diesel 11.1L/12.7L applications.
Important Notes
- Sold individually as a single valve. Order the quantity required for your engine configuration (typically one per cylinder per valve position).
- Chrome-plated stem provides a hard, low-friction wear surface for extended service life.
- Inconel-faced construction provides high-temperature corrosion resistance and thermal fatigue strength, intended for diesel, heavy-duty, and high-load exhaust applications where standard alloys would fail prematurely.
- Always verify head diameter, stem diameter, overall valve length, and groove count against the OE valve being replaced before installation - valve dimensions vary across engine families and a visual match alone is not sufficient.
Specifications
| Part Number | V2231 |
| Valve Type | Exhaust Valve |
| Head Diameter | 1.576" |
| Stem Diameter | 0.3421" (11/32" nominal) |
| Valve Length | 8.497" OAL |
| Material | Inconel faced (severe-service) |
| Stem Finish | Chrome Stem |
| Number of Grooves | 1 |
| Weight | 0.25 lbs |
| OEM Cross-Refs | Detroit: 23524521, Detroit: 23506350, Detroit: 23507504, Detroit: 8929590, Dynagear-Manley: A2231, Fed. Mogul: FP23502068 |
Vehicle Fitment
Detroit Diesel 11.1L / 677 SOHC L6 24V 60 Series 5.118" Bore; Detroit Diesel 12.7L / 775 SOHC L6 24V 60 Series 5.118" Bore.
Product Video
Watch the Enginetech exhaust valve overview: https://youtu.be/G487Dw8HtII
Watch the Enginetech exhaust valve overview: https://youtu.be/eLaQHop7rH8
Enginetech standard valves are stock-replacement engine valves produced from OE grade materials or better, engineered with the production engine rebuilder in mind. Face runout, stem finish, and stem diameter tolerances are held to some of the tightest standards in the internal engine parts industry, and every valve is inspected by on-site engineers against a documented quality plan before it leaves the plant. The line covers domestic, import, and common high-performance applications across a full range of head diameters, stem diameters, and overall lengths, with chrome-plated and nitride-hardened stem finishes available where the engine's operating conditions call for the upgrade. Always verify head diameter, stem diameter, valve length, groove count, and any oversize stem requirement against the original valve being replaced before installing, as multiple valve configurations can share the same vehicle nameplate.
WARNING: This product can expose you to chemicals including lead and nickel, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
