Enginetech part number V3426 is a direct-replacement intake valve for 1996-2012 Ford/Mazda 3.0L applications. Key specifications: 1.377" head, 0.2345" stem, 4.511" overall length, chrome stem.
Important Notes
- Fits vehicles produced through 07/00 and earlier. Verify the production date on the vehicle's VIN plate before ordering.
- Chrome-plated stem provides a hard, low-friction wear surface for extended service life.
- Always verify head diameter, stem diameter, and overall valve length against the OE valve being replaced before installation. Valve dimensions vary across engine families - a visual match is not enough.
Specifications
| Part Number | V3426 |
| Valve Type | Intake Valve |
| Head Diameter | 1.377" |
| Stem Diameter | 0.2345" (6.00mm nominal) |
| Valve Length | 4.511" OAL |
| Stem Finish | Chrome Stem |
| Number of Grooves | 3 |
| Weight | 1.50 lbs |
| OEM Cross-Refs | AC Clevite: 2114105, DNJ Rock: IV412, Dynagear-Manley: S3426, Elgin: I3426, Elgin: I-3426, Fed. Mogul: V4565 |
Vehicle Fitment
- 1996-1999 FORD 3.0L / 181 DOHC V6 24V "1,G,S" Duratec
- 2000-2000 FORD 3.0L / 181 DOHC V6 24V "1,G,S" Duratec
- 2000-2005 FORD 3.0L / 181 DOHC V6 24V "1,G,S" Duratec
- 2006-2012 FORD 3.0L / 181 DOHC V6 24V "1,G,S" Duratec
- 2003-2008 Mazda 3.0L / 2967 DOHC V6 24V AJ Duratec
- 2001-2011 FORD 3.0L / 181 DOHC V6 24V "1,G" Duratec
- 2001-2011 Mazda 3.0L / 2967 DOHC V6 24V AJ Duratec
Product Video
Watch the Enginetech intake valve overview: https://youtu.be/G487Dw8HtII
Watch the Enginetech intake valve overview: https://youtu.be/eLaQHop7rH8
Enginetech standard valves are stock-replacement engine valves produced from OE grade materials or better, engineered with the production engine rebuilder in mind. Face runout, stem finish, and stem diameter tolerances are held to some of the tightest standards in the internal engine parts industry, and every valve is inspected by on-site engineers against a documented quality plan before it leaves the plant. The line covers domestic, import, and common high-performance applications across a full range of head diameters, stem diameters, and overall lengths, with chrome-plated and nitride-hardened stem finishes available where the engine's operating conditions call for the upgrade. Always verify head diameter, stem diameter, valve length, groove count, and any oversize stem requirement against the original valve being replaced before installing, as multiple valve configurations can share the same vehicle nameplate.
WARNING: This product can expose you to chemicals including lead and nickel, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
