The Enginetech V403 exhaust valve features a 1.595" head diameter, 0.3713" stem (3/8" nominal), and 5.676" overall length with a chrome-plated stem. Fits 1983-1995 Ford/International 6.9L/7.3L applications.
Important Notes
- Sold individually as a single valve. Order the quantity required for your engine configuration (typically one per cylinder per valve position).
- This valve has a +0.010" oversize margin (thicker head edge) for improved durability against seat recession. No guide ream required - the stem dimension is standard; only the head margin is upsized.
- Chrome-plated stem provides a hard, low-friction wear surface for extended service life.
- Always verify head diameter, stem diameter, overall valve length, and groove count against the OE valve being replaced before installation - valve dimensions vary across engine families and a visual match alone is not sufficient.
Specifications
| Part Number | V403 |
| Valve Type | Exhaust Valve |
| Head Diameter | 1.595" |
| Stem Diameter | 0.3713" (3/8" nominal) |
| Valve Length | 5.676" OAL |
| Stem Finish | Chrome Stem |
| Number of Grooves | 1 |
| Oversize Margin | +0.010" |
| Weight | 0.5 lbs |
| OEM Cross-Refs | AC Clevite: E1542, Dana-Perfect Circle: 2112562, Dynagear-Manley: A0403, Dynagear-Manley: A2001, Dynagear-Manley: A403, Elgin: E2001 |
Vehicle Fitment
1983-1987 Ford 6.9L / 420 OHV V8 16V "1" Diesel 4.000" Bore; 1988-1994 Ford 7.3L / 445 OHV V8 16V Nat. Asp. IDI Diesel 4.110" Bore; 1984-1987 International 6.9L / 420 OHV V8 Diesel 4.000" Bore; 1988-1995 International 7.3L / 445 OHV V8 IDI Diesel 4.110" Bore.
Product Video
Watch the Enginetech exhaust valve overview: https://youtu.be/G487Dw8HtII
Watch the Enginetech exhaust valve overview: https://youtu.be/eLaQHop7rH8
Enginetech standard valves are stock-replacement engine valves produced from OE grade materials or better, engineered with the production engine rebuilder in mind. Face runout, stem finish, and stem diameter tolerances are held to some of the tightest standards in the internal engine parts industry, and every valve is inspected by on-site engineers against a documented quality plan before it leaves the plant. The line covers domestic, import, and common high-performance applications across a full range of head diameters, stem diameters, and overall lengths, with chrome-plated and nitride-hardened stem finishes available where the engine's operating conditions call for the upgrade. Always verify head diameter, stem diameter, valve length, groove count, and any oversize stem requirement against the original valve being replaced before installing, as multiple valve configurations can share the same vehicle nameplate.
WARNING: This product can expose you to chemicals including lead and nickel, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
