AWE Tuning Track Edition Axle-Back Exhaust
Beginning after the secondary catalyst, the AWE Track Edition picks up right before the rear axle and provides a full single 3" route from this point, then splits to dual 3" tip outlets. The Track Edition has absolutely zero filter -- making its sole purpose to increase the volume out of the B48 engine while remaining completely 50-state emissions compliant (and saving weight and dollars along the way). A simple cut (at the factory cut point) is all it takes, and the Track Edition goes into place via four bolt-on locations. AWE includes a factory clamp for the cut point that allows drivers to easily swap back to their stock rear section if ever needed. Here's some helpful guidance if you're deciding between kits: Due to the structural differences between the 330i and 430i, we are recommending the following per application: for the 330i, with all factory emissions equipment in place, the Track Edition is recommended for those wanting an elevated exhaust experience from within the cabin. If you plan to upgrade anything further upstream on a 330i, consider the Touring Edition - if you go Touring Edition on your 330i without any upstream modifications, it will resemble the stock sound in the cabin. On the 430i, interior acoustics (since it's a coupe) differ when compared to its sedan sibling -- aka it's louder inside. So, for you 430i drivers, we are recommending the Touring Edition, as the sound is much more pronounced in the cabin on the 430i. The Track Edition on the 430i is a bit rowdy. TLDR: 330i go Track Edition, 430i go Touring Edition!
Features
- 50-state emissions legal
- Engineered for coupe and sedan
- Included OEM sleeve clamp allows easy conversion back to stock exhaust if needed
- Crafted from CNC mandrel-bent 3" U.S.-sourced .065" wall T304L stainless steel
- AWE Valve Simulator Brackets included
- Dual 4.5" slash-cut tips in diamond black
- Direct bolt-on for factory-like simplicity
- Less is more: clean, straight-through design maximizes performance
- Perfect fitment, guaranteed
- Features the AWE No CEL Guarantee
Specifications
| Part Number | 3020-33429 |
| Brand | AWE Tuning |
| Part Type | Axle-Back Exhaust |
| System Type | Axle Back |
| Edition | Track Edition |
| Material | T304L Stainless Steel |
| Tip Finish | Diamond Black |
| Tip Quantity | 2 |
| Tip Diameter (in) | 4.5 |
| Tubing Diameter (in) | 3 |
| Valved | No |
| 180 Technology | No |
| Tune Required | No |
| Emissions Legality | 50 State Legal |
| Country of Origin | USA |
| Warranty | Lifetime on exhaust, 1 year on tips |
| UPC | 810098809559 |
Vehicle Fitment
Fits: 2019-2024 BMW models including 430i. Use the vehicle selector above to confirm fitment for your exact car.
Emissions: 50 State Legal.
California Proposition 65 Warning
WARNING: AWE products in their physical form as sold do not present a chemical exposure hazard. However, operations including, but not limited to welding, brazing, or thermal cutting can expose you to chemicals including Chromium, Nickel, Cobalt, Arsenic, Cadmium, and Lead which are known to the State Of California to cause cancer, birth defects, or other reproductive harm. Likewise, operating, servicing, and maintaining an automobile can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust fumes, service your vehicle in a well-ventilated area, and wear gloves or wash your hands frequently when servicing your vehicle.
