The MagnaFlow Touring Series Cat-Back Performance Exhaust System 15648 15648 is the perfect partner for your 1.8L, 2.0L 1998-2006 Volkswagen to take on a grand tour or a weekend cruise thanks to the powerful, resonant exhaust note and dyno-proven performance it brings to the table. This durable, corrosion resistant stainless steel exhaust kit is engineered to conquer the miles with ease while enhancing your driving experience with Moderate exterior and Mild interior sound levels generated through its fast-flowing, mandrel bent 2.25in. main piping and 2 Straight-Through muffler that terminate in a Dual Straight Driver Side Rear exit with 3in. Polished Welded-On Single Wall Angle Cut Rolled Edge tips. 15648 features a cat-back layout design to replace your import's stock exhaust components from the catalytic converter on back. This Volkswagen exhaust system is compatible with 1998-2006 engines. The use of extensive 3D scans made during the development process has resulted in an easy-to-install, direct-fit design that fits your Volkswagen like a glove. 15648 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's limited lifetime construction warranty.

The Black DPF series is our premier MagnaFlow Performance DPF Series featuring stainless construction with the added style of a Black Coating applied from tailpipe to tip.

MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 93419 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed to fit the 1999-2006 Chevrolet Silverado 1500, 2000-2006 Chevrolet Tahoe, and additional vehicles. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

The MagnaFlow 2011-2012 Ford Mustang Race Series Axle-Back Performance Exhaust System 15596 doesn't leave any performance on the table with a race-ready, light weight, dyno-proven design ready to help your 3.7L 2011-2012 Ford Mustang take on any pretenders, whether on the track or the street. Exhaust kit 15596 is engineered to produce our powerful, resonant signature exhaust note at Very Aggressive exterior and Aggressive interior sound levels with an axle-back layout that replaces your vehicle's exhaust components from near the rear axle on back. Please check to ensure compliance with local noise regulations. This Ford Mustang exhaust kit features fast-flowing mandrel bent 2.5in. diameter main piping that ends in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips. Extensive 3D scanning during development and the use of advanced CNC precision robotic manufacturing techniques ensures that 15596's direct-fit design fits so perfectly that you can easily install the system yourself. The durable, corrosion resistant stainless steel construction of exhaust system 15596 is backed by MagnaFlow's limited lifetime warranty.

The MagnaFlow Street Series Axle-Back Performance Exhaust System 15178 15178 brings enhanced engine sound and dyno-proven performance to your 3.6L, 3.8L 2007-2018 Jeep with a healthy helping of our deep, resonant signature exhaust note at Moderate exterior and Mild interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this Jeep exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features an axle-back layout designed to replace your Jeep's exhaust system from near the rear axle on back. With its fast-flowing, mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, your ride will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15178 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.

The MagnaFlow 5 X 8in. Oval Straight-Through Performance Exhaust Muffler 12286 is engineered to enhance your ride with a healthy helping of our signature exhaust sound and dyno-proven performance thanks to its free-flowing straight-through perforated stainless steel core wrapped in stainless steel mesh and acoustic fiber fill. The reversible, universal 2.5/2.5in. diameter inlet/outlet Straight-Through layout allows you to install it in whatever orientation and configuration you see fit. However, professional installation is highly recommended. Muffler 12286s weight-optimized 5x8x24in. oval-shaped body features a satin finish that elevates the overall aesthetics of your current exhaust setup. 12286 is made of durable, corrosion resistant stainless steel and produced using cutting-edge CNC precision robotic manufacturing techniques, all backed by MagnaFlow's limited lifetime construction warranty.

MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51356 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 51199 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. Designed to fit the 2001-2003 Ford F-150, 2001-2002 Ford Expedition, and more, this direct-fit catalytic converter also interchanges with OE parts 2L3Z-5E212-CA and 1L3Z-5E212-CA. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

The MagnaFlow 1999-2003 Volkswagen Jetta Sport Series Cat-Back Performance Exhaust System 15669 enhances your 1.8L, 2.0L, 2.8L 1999-2003 Volkswagen Jetta with an aggressive character that is sure to help you stand out from the other Volkswagen Jetta you encounter on the street. With its 2.25in. diameter fast-flowing mandrel bent main piping that passes through 2 Straight-Through mufflers before ending in a Dual Straight Driver Side Rear exit with 3in. Polished Welded-On Single Wall Angle Cut Rolled Edge tips, this dyno-proven Volkswagen Jetta exhaust system refuses to be ignored. As such, 15669 is tuned to produce our powerful, resonant signature exhaust note at Aggressive exterior and Moderate interior sound levels, so please check to ensure compliance with local noise regulations. The system's cat-back design replaces all your import's stock exhaust components from the catalytic converter on back. Extensive 3D scanning and CNC precision robotic manufacturing techniques are used to ensure that your exhaust system fits perfectly with just a simple do-it-yourself installation process. The durable, corrosion resistant stainless steel construction of 15669 is backed by MagnaFlow's limited lifetime warranty.

The MagnaFlow 2018-2022 Honda Accord Street Series Cat-Back Performance Exhaust System 19393 brings out the personality of your 2.0L 2018-2022 Honda Accord with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 3 Straight-Through mufflers ending in a Dual Split Rear exit, this Honda Accord exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Honda Accord's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19393 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19393 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 22-020. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2017-2020 Toyota Highlander, 2016-2019 Lexus RX350, and more, this direct-fit catalytic converter also interchanges with OE parts 17150-0P331 and 17150-0P350, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

The MagnaFlow 2006-2007 Chevrolet Monte Carlo Street Series Cat-Back Performance Exhaust System 16727 brings out the personality of your 5.3L 2006-2007 Chevrolet Monte Carlo with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 3 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Chevrolet Monte Carlo exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Chevrolet Monte Carlo's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 16727 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 16727 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 22629. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 1996-1999 Acura Integra and interchanges with OE parts 18160-P75-A11 and 18160-P75-A61, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 49689. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2007-2009 Jeep Wrangler and interchanges with OE parts 5205 9930AH and 5205 9930AF, among others. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

The MagnaFlow Street Series Cat-Back Performance Exhaust System 16869 brings out the personality of your Truck with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Dual Split Rear exit with 5in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Truck exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Truck's to shame. With this system your vehicle will be producing Aggressive exterior and Moderate interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 16869 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 16869 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 5461334. The Universal design allows the part to fit a wide array of vehicles (cutting and welding required), and the stainless steel construction of this spun body catalytic converter is highly resistant to corrosion. The single laser fusion weld of the spun body greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 52024. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2013-2017 Honda Accord, 2015-2019 Honda CR-V, and more, this direct-fit catalytic converter also interchanges with OE parts 18180-RDF-A00 and 18190-5A3-L00, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

The MagnaFlow 2001-2006 Toyota Sequoia Street Series Cat-Back Performance Exhaust System 15808 brings out the personality of your 4.7L 2001-2006 Toyota Sequoia with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 2 Straight-Through mufflers ending in a Single Straight Passenger Side Rear exit with 3.5 x 5.5in. Polished Welded-On Double Wall Straight Cut Rolled Edge tips, this Toyota Sequoia exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Toyota Sequoia's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15808 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15808 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.

MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 441334 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

The MagnaFlow Street Series Cat-Back Performance Exhaust System 19530 brings out the personality of your 7.3L 2020-2023 Ford with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3.5in. main piping and 2 Straight-Through mufflers ending in a Single Passenger Side Rear exit with 5in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Ford exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19530 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19530 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 52559. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2008-2020 Toyota Sequoia and interchanges with OE parts 17450-0S040 and 17450-0S140, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

The MagnaFlow Pro Series Filter-Back Performance Exhaust System 17873 utilizes its weight-optimized, durable, corrosion resistant stainless steel design to enhance your 6.4L, 6.7L 2008-2024 Ford with MagnaFlow's signature sound and dyno-tested performance. 17873's 4in. diameter mandrel bent main piping features a muffler delete and terminates in a Dual Same Side Behind Passenger Rear Tire exit with 5in. Polished Welded-On Single Wall Angle Cut Rolled Edge tips. This emissions-legal filter-back exhaust kit has been tuned to create Mild interior and Moderate exterior sound levels. Exhaust system 17873 is emissions-legal and produced using CNC precision robotic manufacturing techniques that result in a direct-fit design that you can install yourself, all backed by MagnaFlow's limited lifetime warranty.

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 52030. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2010-2014 Honda Insight and interchanges with OE parts 18190-RBJ-A10 and 18190-RBJ-G00, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 24464. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2001-2005 Lexus IS300 and interchanges with OE part 17410-46580. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

The MagnaFlow Jeep Gladiator Overland Series Cat-Back Performance Exhaust System #19621 brings superior ground clearance, dyno-proven performance and our signature exhaust sound to your 2020-2023 Jeep Gladiator equipped with the 3.6L engine option. This kit’s direct-fit configuration is designed for easy installation and intended to replace your rig’s OEM exhaust components from near the catalytic converter on back. #19621 features 3” mandrel bent main piping that passes through an 18” straight-through oval bodied muffler and NDT (No Drone Technology) tuned chamber before terminating in a high-clearance tucked tailpipe to the rear of the driver’s side. The integration of MagnaFlow’s NDT technology allows this exhaust system to be enjoyed at highway speeds without any unwanted droning noises that can occur in competing exhaust systems. The kit’s high clearance design and improved departure angles versus the stock system allows your truck to handle any terrain more easily. This Jeep Gladiator exhaust system also offers unmatched tunability thanks to the accessory port on the integrated muffler, which allows for different modules to be attached. Exhaust kit #19621 includes an NDT module, which can be attached to that port to further mitigate certain droning frequencies, perfect for longer trips. Alternatively, the port can be covered with the included pipe cap which allows for a more free-breathing engine note to make its way through the pipes. This performance exhaust kit is made of durable, corrosion resistant stainless steel and produced using advanced CNC precision robotic manufacturing techniques, all backed by MagnaFlow’s limited lifetime warranty.

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 49260. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2003-2007 Honda Accord and interchanges with OE parts 18160-RAA-A00 and 18160-RAA-A11, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

MagnaFlow Direct-Fit Catalytic Converters are designed for easy bolt-on installation for the Professional Installer. Each is designed to exact the original equipment specifications. While the majority of the Direct-Fit Catalytic Converter products do not require welding; cutting or bending; limited applications may require additional welding for optimal installation.

The MagnaFlow 2016-2021 Honda Civic Street Series Cat-Back Performance Exhaust System 19312 brings out the personality of your 1.5L 2016-2021 Honda Civic with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.25in. main piping and 3 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Honda Civic exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Honda Civic's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19312 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19312 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.

The MagnaFlow Black Series Filter-Back Performance Exhaust System 17071 brings the dyno-proven performance and deep resonating sound that we're known for to your 6.7L 2019-2023 Ram in premium kit that includes tailpipe with a premium black powder-coated finish. This Ram exhaust system is designed to produce Mild interior and Moderate exterior sound levels thanks to clever tuning of its fast-flowing mandrel bent 5in. diameter main piping that ends in a Single Passenger Side Rear exit with 6in. Black Coated Welded-On Single Wall Angle Cut Rolled Edge tips. Exhaust kit 17071's filter-back layout features a direct-fit, easy-to-install design and is made of strong, corrosion-resistant stainless steel. It is produced using CNC precision robotic manufacturing techniques and backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.

MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23884 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. Designed to fit the 1988-1995 Toyota Pickup, 1988-1995 Toyota 4Runner, and more, this direct-fit catalytic converter also interchanges with OE parts 18450-65020 and 18450-65030, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 5421206. The Universal design allows the part to fit a wide array of vehicles (cutting and welding required), and the stainless steel construction of this spun body catalytic converter is highly resistant to corrosion. The single laser fusion weld of the spun body greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 49935. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2007-2019 Toyota Tundra and interchanges with OE parts 17450-0S110 and 17450-0S180, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Keep the check engine light off with MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 22755. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 1990-1995 Nissan 300ZX and interchanges with OE parts 20010-33P02 and 20010-40P08, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

The Street Series Black Performance Exhaust system delivers dyno proven power with a comfortable interior sound and performance exterior sound. Features Black coated tips.

MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 93426 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed to fit the 1976-1981 Chevrolet Corvette and 1977-1979 Chevrolet Camaro. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

The MagnaFlow Toyota Tundra Overland Series performance exhaust system #19604 is built to withstand anything that Mother Nature throws at it thanks to the elevated ground clearance and superior departure angles it offers compared to your truck’s existing exhaust system. #19604 makes this all possible thanks to its single tipless, high tuck tailpipe that exits the rear driver’s side. The system’s cat-back design replaces all of your truck’s stock exhaust components from near the catalytic converter on back. Our innovative NDT (No Drone Technology) resonators are engineered to keep droning noises in check using quarter-wave passive noise cancellation, improving your situational awareness while out on the trail and facilitating a more comfortable ride when cruising the highway. Exhaust kit #19604 is compatible with all 2022-2023 Toyota Tundra crew cab and extended cab/standard bed configurations equipped with the 3.5L V6 engine option. #19604 features 3” diameter, mandrel bent main tubing that flows through a fast-flowing, straight through 5”x11”x22” offset/offset same-side muffler with internal branch pipe, all with a premium brushed finish. This Toyota Tundra performance exhaust system is made of durable, corrosion resistant stainless steel and produced using advanced, CNC precision robotic manufacturing techniques, all backed by MagnaFlow’s limited lifetime warranty.

The MagnaFlow Street Series Cat-Back Performance Exhaust System 15798 brings out the personality of your SUV with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 4in. main piping and 1 Straight-Through mufflers ending in a Single Passenger Side Rear exit with 4in. Polished Welded-On Single Wall Angle Cut Rolled Edge tips, this SUV exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other SUV's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15798 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15798 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 52549. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2011-2016 Toyota Sienna and interchanges with OE part 17420-0P300. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 447103 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. Designed to fit the 1995-1997 Toyota Land Cruiser and 1996-1997 Lexus LX450, this direct-fit catalytic converter also interchanges with OE parts 17401-66090 and 17401-66009. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

The MagnaFlow Rock Crawler Series Cat-Back Performance Exhaust System 15237 15237 brings superior boulder-climbing capabilities to your 3.6L 2012-2018 Jeep with a weight-optimized, dyno-tested, corrosion resistant and durable stainless steel design engineered to closely hug the undercarriage of your rig for improved ground clearance. Exhaust kit 15237 is engineered to produce our powerful, resonant signature exhaust note at Aggressive exterior and Moderate interior sound levels. Extensive 3D scanning was used during the development of this Jeep exhaust system to create a direct-fit design, enabling a do-it-yourself installation process. 15237's emissions-legal cat-back design replaces all your rig's exhaust components from the catalytic converter on back with its 2.5in. diameter mandrel bent main piping that passes through 1 Straight-Through mufflers before ending in a Single Straight Driver Side Rear exit. The turndown style tipless exit improves departure angles, allowing for more options when it comes to traversing tricky boulders and other off-road obstacles. Exhaust system 15237 is produced using advanced CNC precision robotic manufacturing techniques and backed by MagnaFlow's limited lifetime warranty.

The MagnaFlow Black Series Filter-Back Performance Exhaust System 17067 brings the dyno-proven performance and deep resonating sound that we're known for to your 6.4L, 6.7L 2008-2024 Ford in premium kit that includes tailpipe with a premium black powder-coated finish. This Ford exhaust system is designed to produce Mild interior and Moderate exterior sound levels thanks to clever tuning of its fast-flowing mandrel bent 5in. diameter main piping that ends in a Single Passenger Side Rear exit with 6in. Black Coated Welded-On Single Wall Angle Cut Rolled Edge tips. Exhaust kit 17067's filter-back layout features a direct-fit, easy-to-install design and is made of strong, corrosion-resistant stainless steel. It is produced using CNC precision robotic manufacturing techniques and backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 21-252. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 2011-2019 Chevrolet Silverado 2500 HD, 2011-2019 GMC Sierra 2500 HD, and additional vehicles. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

The MagnaFlow 1999-2004 Ford Mustang Street Series Cat-Back Performance Exhaust System 15671 brings out the personality of your 4.6L 1999-2004 Ford Mustang with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 3.5in. Polished Clamp-On Single Wall Angle Cut Cut Edge tips, this Ford Mustang exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford Mustang's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15671 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15671 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.

The MagnaFlow 2008-2014 Subaru Impreza Street Series Cat-Back Performance Exhaust System 16824 brings out the personality of your 2.5L 2008-2014 Subaru Impreza with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Quad Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, this Subaru Impreza exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Subaru Impreza's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 16824 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 16824 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.

The MagnaFlow Touring Series Cat-Back Performance Exhaust System 16560 16560 is the perfect partner for your 4.4L, 4.8L 2004-2010 BMW to take on a grand tour or a weekend cruise thanks to the powerful, resonant exhaust note and dyno-proven performance it brings to the table. This durable, corrosion resistant stainless steel exhaust kit is engineered to conquer the miles with ease while enhancing your driving experience with Moderate exterior and Mild interior sound levels generated through its fast-flowing, mandrel bent 2.5in. main piping and 3 Straight-Through muffler that terminate in a Dual Split Rear exit with 3.25 x 4.75in. Polished Welded-On Double Wall Straight Cut Rolled Edge tips. 16560 features a cat-back layout design to replace your import's stock exhaust components from the catalytic converter on back. This BMW exhaust system is compatible with 2004-2010 engines. The use of extensive 3D scans made during the development process has resulted in an easy-to-install, direct-fit design that fits your BMW like a glove. 16560 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's limited lifetime construction warranty.

The MagnaFlow Street Series Cat-Back Performance Exhaust System 16520 brings out the personality of your Truck with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Dual Split Rear exit with 3.5in. Polished Clamp-On Single Wall Angle Cut Rolled Edge tips, this Truck exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Truck's to shame. With this system your vehicle will be producing Aggressive exterior and Moderate interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 16520 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 16520 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 24064. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2000-2005 Toyota Celica and interchanges with OE parts 17410-22070 and 17410-22380. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

The MagnaFlow 2010-2013 Mazda 3 Street Series Cat-Back Performance Exhaust System 15557 brings out the personality of your 2.3L 2010-2013 Mazda 3 with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Mazda 3 exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Mazda 3's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15557 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15557 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 52408. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2009-2017 Volkswagen Tiguan, 2015-2018 Audi Q3, and more, this direct-fit catalytic converter also interchanges with OE parts 5N0 254 500 SX and 5N0 254 500 NX, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

The MagnaFlow 2007-2010 Jeep Grand Cherokee Street Series Cat-Back Performance Exhaust System 16834 brings out the personality of your 3.7L 2007-2010 Jeep Grand Cherokee with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Single Straight Passenger Side Rear exit with 3.5in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Jeep Grand Cherokee exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Jeep Grand Cherokee's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 16834 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 16834 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.

The MagnaFlow Toyota 4Runner Overland Series Cat-Back Performance Exhaust System #19546 will enhance your 4.0L V6 Toyota 4Runner (2003-2023) with MagnaFlow’s renowned deep rumble and dyno-proven performance. MagnaFlow #19546 is weight optimized for additional utility and designed such that its mandrel bent 2.5” diameter main piping is situated more closely to the body than the stock configuration. This combined with a single high-clearance no-tip, passenger-side rear exhaust exit allows for significantly improved ground clearance and departure angles. MagnaFlow exhaust system #19546 is compatible with the most popular bolt-on aftermarket modifications and features our No Drone Technology, which cancels out the natural droning frequencies of the V6 Toyota 4Runner at cruising speeds. This allows for a quiet ride on the highway while retaining the character of your rig’s exhaust note. CNC precision robotic manufacturing enables perfect fitment and hassle-free bolt-on installation. The 100% stainless steel construction of exhaust kit #19546 is covered by MagnaFlow’s limited lifetime construction warranty.

The MagnaFlow Redpack 3.5in. Round Glasspack Performance Exhaust Muffler 13134 features the same classic deep sound and dyno-proven performance of our other glasspack mufflers with the additional flair of a stylish yet timeless red finish. 13134's 2/2in. round body and reversible straight-through universal design can be integrated into your vehicle's exhaust system however you see fit, although professional installation is recommended. Check to ensure compliance with local noise regulations. This free-flowing muffler is engineered to add a dose of hot rod fury to your ride. 13134 features durable, corrosion resistant aluminized steel construction and is produced using cutting-edge CNC precision robotic manufacturing techniques, all backed by MagnaFlow's 90-day limited construction warranty.

The MagnaFlow XL 4 X 9in. Oval Multi-Chamber Performance Exhaust Muffler 13256 features a straight-through, weight-optimized reversible design with a perforated stainless steel core featuring baffles and tuning gates, enabling it to deliver the powerful signature sound and dyno-proven performance that's made MagnaFlow a household name. Muffler 13256's oval-shaped, 4x9x18in. body and universal 2.5/2.5in. diameter inlet/outlet layout enables flexible installation options to match the spacing requirements of your vehicle. Professional installation is highly recommended. 13256 is produced using advanced CNC precision robotic manufacturing techniques and features durable, corrosion resistant stainless-steel construction, all backed by MagnaFlow's limited lifetime warranty.

The MagnaFlow Street Series Cat-Back Performance Exhaust System #19561 is compatible with all 2015-2023 and 2021+ engine variants of the Ford F-150. Enhance the sound of your truck’s engine with MagnaFlow’s deep signature exhaust note and dyno proven performance enhancements while maintaining only mild levels of interior noise. MagnaFlow #19561 features durable 100% stainless steel construction, a single straight-through muffler, 3” mandrel bent tubing, a single polished 4” tip and passenger-side exit. Cutting-edge CNC precision robotic manufacturing is used to ensure that the exhaust kit’s direct-fit design bolts on easily for hassle-free installation.

The MagnaFlow 2015-2017 Volkswagen GTI Touring Series Cat-Back Performance Exhaust System 15357 is the perfect partner for your 2.0L 2015-2017 Volkswagen GTI to take on a grand tour or a weekend cruise thanks to the powerful, resonant exhaust note and dyno-proven performance it brings to the table. This durable, corrosion resistant stainless steel exhaust kit is engineered to conquer the miles with ease while enhancing your driving experience with Moderate exterior and Mild interior sound levels generated through its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through muffler that terminate in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips. 15357 features a cat-back layout design to replace your import's stock exhaust components from the catalytic converter on back. This Volkswagen GTI exhaust system is compatible with 2015-2017 engines. The use of extensive 3D scans made during the development process has resulted in an easy-to-install, direct-fit design that fits your Volkswagen GTI like a glove. 15357 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's limited lifetime construction warranty.

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23477. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 1998-2002 Pontiac Firebird and 1998-2002 Chevrolet Camaro. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 93417. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2004-2005 Dodge Ram 1500. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 50899. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2004-2006 Jeep Wrangler and interchanges with OE parts 5205 9681AE and 5205 9681AA, among others. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

The MagnaFlow Street Series Cat-Back Performance Exhaust System 19351 brings out the personality of your 6.2L 2017-2022 Ford with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3.5in. main piping and 1 Straight-Through mufflers ending in a Single Passenger Side Rear exit with 5in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Ford exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19351 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19351 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.

Keep the check engine light off with MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 22636. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 1992-1995 Honda Civic, 1994-1995 Honda Accord, and more, this direct-fit catalytic converter also interchanges with OE parts 18150-P0A-A02 and 18150-P0A-A12, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

The MagnaFlow Street Series Crossmember-Back Performance Exhaust System 15899 brings enhanced engine sound and dyno-proven performance to your muscle car with a healthy helping of our deep, resonant signature exhaust note at Aggressive exterior and Moderate interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features a crossmember-back layout designed to replace your exhaust system from the crossmember on back. With its fast-flowing, mandrel bent 3in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit that you can enhance with tips of your choosing, your muscle car will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15899 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's limited lifetime construction warranty.

The MagnaFlow 2004-2008 Chrysler Crossfire Street Series Cat-Back Performance Exhaust System 16633 brings out the personality of your 3.2L 2004-2008 Chrysler Crossfire with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.25in. main piping and 2 Straight-Through mufflers ending in a Dual Center Rear exit with 3.5 x 5.5in. Polished Welded-On Double Wall Straight Cut Rolled Edge tips, this Chrysler Crossfire exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Chrysler Crossfire's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 16633 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 16633 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.

The MagnaFlow 2015-2023 Dodge Charger Competition Series Cat-Back Performance Exhaust System 19371 brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we're so well known for. This exhaust kit is designed to enhance your 5.7L, 6.2L, 6.4L 2015-2023 Dodge Charger with dyno-proven performance made possible thanks to fast-flowing mandrel bent 3in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4.5in. Polished Welded-On Double Wall Angle Cut Folded Edge tips featuring a sporty finish. The exhaust system's cat-back layout replaces your ride's exhaust system from near the catalytic converter on back. Exhaust system 19371 is engineered to make your vehicle's engine produce Aggressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 19371's direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow's limited lifetime warranty. Please check to ensure compliance with local noise regulations.

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 51201. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2007-2009 Hyundai Santa Fe and 2007-2012 Hyundai Veracruz, this direct-fit catalytic converter also interchanges with OE parts 28510-3C470 and 28510-3C670, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

The MagnaFlow 2005-2009 Ford Mustang Street Series Cat-Back Performance Exhaust System 15881 brings out the personality of your 4.6L, 5.4L 2005-2009 Ford Mustang with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Ford Mustang exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford Mustang's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15881 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15881 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.

The MagnaFlow 1999-2005 Mazda Miata Street Series Cat-Back Performance Exhaust System 16638 brings out the personality of your 1.8L 1999-2005 Mazda Miata with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Single Straight Passenger Side Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, this Mazda Miata exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Mazda Miata's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 16638 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 16638 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.

The MagnaFlow 2000-2004 Toyota Tacoma Street Series Cat-Back Performance Exhaust System 15811 brings out the personality of your 2.7L, 3.4L 2000-2004 Toyota Tacoma with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Single Passenger Side Rear exit with 3in. Polished Welded-On Single Wall Angle Cut Cut Edge tips, this Toyota Tacoma exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Toyota Tacoma's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15811 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15811 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.

The MagnaFlow 2007-2024 Nissan TITAN Street Series Cat-Back Performance Exhaust System 19421 brings out the personality of your 5.6L 2007-2023 Nissan TITAN with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Single Passenger Side Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Nissan TITAN exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Nissan TITAN's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19421 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19421 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.

The MagnaFlow 1998-2002 Honda Accord Street Series Cat-Back Performance Exhaust System 15640 brings out the personality of your 3.0L 1998-2002 Honda Accord with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.25in. main piping and 3 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Honda Accord exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Honda Accord's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15640 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15640 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 51872. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2003-2004 Cadillac CTS. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23696. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 1994-1997 Mazda Miata and interchanges with OE parts BPE8-20-600 and BPS1-20-600. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 51708. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2009-2014 Hyundai Genesis, 2010-2016 Hyundai Genesis Coupe, and more, this direct-fit catalytic converter also interchanges with OE parts 28950-2C650 and 28950-3C750, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 5551355. The Universal design allows the part to fit a wide array of vehicles (cutting and welding required), and the stainless steel construction of this spun body catalytic converter is highly resistant to corrosion. The single laser fusion weld of the spun body greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

The MagnaFlow NEO Series Cat-back Acura Integra/Honda Civic Si Performance Exhaust System #19600 is engineered to enhance the sound and performance of your sporty compact’s 1.5L I4 engine with improved airflow and a fresh take on MagnaFlow’s signature exhaust sound. Passersby and passengers in your 2023 Acura Integra or 2022-2023 Honda Civic Si will know that more than just the VTEC kicked in when your right foot sends your car’s four-banger barreling towards its redline with a ferocity that the stock Civic Si and Integra simply can’t match. Improved exhaust flow is made possible thanks to the system’s 2.5” mandrel bent main tubing with dual 4”x 4” x 11” NDT (No Drone Technology) resonators, terminating in a dual split rear exit with 4.5” carbon fiber tips. Exhaust kit #19600’s integration of MagnaFlow’s No Drone Technology ensures that unwanted droning noises are kept in check at cruising speeds while allowing you to enjoy all the other epic engine sounds your NEO Series system makes possible. #19600’s easy-to-install, direct-fit bolt-on design replaces all major exhaust components from near the catalytic converter on back and is made entirely of durable, corrosion resistant stainless steel (except the carbon fiber tips), all covered by MagnaFlow’s limited lifetime construction warranty.

The MagnaFlow 5 X 8in. Oval Straight-Through Performance Exhaust Muffler 12198 is engineered to enhance your ride with a healthy helping of our signature exhaust sound and dyno-proven performance thanks to its free-flowing straight-through perforated stainless steel core wrapped in stainless steel mesh and acoustic fiber fill. The reversible, universal 3/2.5in. diameter inlet/outlet Straight-Through layout allows you to install it in whatever orientation and configuration you see fit. However, professional installation is highly recommended. Muffler 12198s weight-optimized 5x8x14in. oval-shaped body features a satin finish that elevates the overall aesthetics of your current exhaust setup. 12198 is made of durable, corrosion resistant stainless steel and produced using cutting-edge CNC precision robotic manufacturing techniques, all backed by MagnaFlow's limited lifetime construction warranty.

MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 93441 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed to fit the 1986-1991 Chevrolet Corvette, 1986-1992 Chevrolet Camaro, and additional vehicles. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51305 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Keep the check engine light off with MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 53954. The Universal design allows the part to fit a wide array of vehicles (cutting and welding required), and the stainless steel construction of this spun body catalytic converter is highly resistant to corrosion. The single laser fusion weld of the spun body greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

The MagnaFlow 2019-2023 Ram 1500 D-Fit Performance Exhaust Muffler Replacement Kit With Muffler 19433 offers enthusiasts an easy way to upgrade their 2019-2023 Ram 1500 5.7L with the deep signature sound and dyno-proven performance that MagnaFlow exhaust systems are famous for. This easy-to-install solution is designed to connect (where applicable) to the stock break points of your 5.7L truck and replaces the restrictive factory muffler with a MagnaFlow straight-through muffler while retaining the OEM piping and tailpipe. 19433?is engineered to produce Moderate exterior and Mild interior sound levels generated through its fast-flowing, mandrel bent 3in. main piping. This exhaust system is produced using CNC precision robotic manufacturing and features durable 100% stainless steel construction, all backed by a limited lifetime construction warranty.

The MagnaFlow 2008 Volkswagen R32 Sport Series Cat-Back Performance Exhaust System 16502 enhances your 3.2L 2008-2008 Volkswagen R32 with an aggressive character that is sure to help you stand out from the other Volkswagen R32 you encounter on the street. With its 2.5in. diameter fast-flowing mandrel bent main piping that passes through 1 Straight-Through mufflers before ending in a Dual Center Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, this dyno-proven Volkswagen R32 exhaust system refuses to be ignored. As such, 16502 is tuned to produce our powerful, resonant signature exhaust note at Aggressive exterior and Moderate interior sound levels, so please check to ensure compliance with local noise regulations. The system's cat-back design replaces all your import's stock exhaust components from the catalytic converter on back. Extensive 3D scanning and CNC precision robotic manufacturing techniques are used to ensure that your exhaust system fits perfectly with just a simple do-it-yourself installation process. The durable, corrosion resistant stainless steel construction of 16502 is backed by MagnaFlow's limited lifetime warranty.

The MagnaFlow 1994-1998 Ford Mustang Competition Series Cat-Back Performance Exhaust System 15677 brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we're so well known for. This exhaust kit is designed to enhance your 4.6L, 5.0L 1994-1998 Ford Mustang with dyno-proven performance made possible thanks to fast-flowing mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 3.5in. Polished Clamp-On Single Wall Angle Cut Cut Edge tips featuring a sporty finish. The exhaust system's cat-back layout replaces your ride's exhaust system from near the catalytic converter on back. Exhaust system 15677 is engineered to make your vehicle's engine produce Aggressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 15677's direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow's limited lifetime warranty. Please check to ensure compliance with local noise regulations.

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 24090. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2004-2008 Ford F-150 and 2006-2008 Lincoln Mark LT, this direct-fit catalytic converter also interchanges with OE parts 4L3Z-5E212-GE and L3Z5-E212-GB. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

The MagnaFlow 2002-2008 Audi A4 Quattro Touring Series Cat-Back Performance Exhaust System 16601 is the perfect partner for your 1.8L, 2.0L 2002-2008 Audi A4 Quattro to take on a grand tour or a weekend cruise thanks to the powerful, resonant exhaust note and dyno-proven performance it brings to the table. This durable, corrosion resistant stainless steel exhaust kit is engineered to conquer the miles with ease while enhancing your driving experience with Moderate exterior and Mild interior sound levels generated through its fast-flowing, mandrel bent 2.5in. main piping and 4 Straight-Through muffler that terminate in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips. 16601 features a cat-back layout design to replace your import's stock exhaust components from the catalytic converter on back. This Audi A4 Quattro exhaust system is compatible with 2002-2008 engines. The use of extensive 3D scans made during the development process has resulted in an easy-to-install, direct-fit design that fits your Audi A4 Quattro like a glove. 16601 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's limited lifetime construction warranty.

MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 5592306 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 51578. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2009-2013 Chevrolet Silverado 1500, 2009-2013 GMC Sierra 1500, and more, this direct-fit catalytic converter also interchanges with OE parts 19418941 and 15905948, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

The MagnaFlow 2024 Ford Mustang GT Competition Series Cat-Back Performance Exhaust System brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we're so well known for. This Ford Mustang cat-back exhaust kit is designed to enhance your 5.0L 2024 Ford Mustang GT with dyno-proven performance made possible thanks to a resonator-delete H-pipe, fast-flowing mandrel bent 3in. diameter piping that passes 2 all-new dyno-proven performance chambered mufflers ending in a quad split rear exit with 4in. welded-on double wall angle cut folded edge tips featuring a sporty black chrome finish. The direct-fit design allows for an easy, do-it-yourself installation process. Exhaust system 19643 is engineered to make your Ford Mustang's engine produce moderate interior and aggressive exterior sound levels, befitting its competition-oriented design. 19643 is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty. Please check to ensure compliance with local noise regulations.

The MagnaFlow Chevrolet Silverado 1500/GMC Sierra 1500 Overland Series Cat-Back Performance Exhaust System #19626 is engineered to enhance the off-road capabilities, performance and sound of your 2019-2023 Chevy Silverado 1500 or GMC Sierra 1500 equipped with the 6.2L engine option. The high clearance design of this exhaust kit increases your rig’s capacity to traverse any sort of terrain, while the incorporation of an NDT (No Drone Technology) resonator helps mitigate the droning frequencies that can otherwise occur at highway cruising speeds. #19626 features 3.5” diameter main piping that passes through an 18” oval bodied straight-through muffler and 14” NDT reflection chamber before terminating in a dual split rear exit with high clearance tailpipes. Exhaust kit #19626’s easy-to-install direct-fit design is engineered to replace all of your truck’s stock exhaust components from near the catalytic converter on back. This Chevrolet Silverado 1500/GMC Sierra 1500 performance exhaust system is made of durable, corrosion resistant stainless steel and produced using advanced CNC precision robotic manufacturing techniques, all backed by MagnaFlow’s limited lifetime warranty.

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 452096. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2000-2004 Nissan Frontier and interchanges with OE parts 14002-3S600 and 14002-3S610, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

The MagnaFlow 2015-2023 Dodge Challenger Race Series Axle-Back Performance Exhaust System 19206 doesn't leave any performance on the table with a race-ready, light weight, dyno-proven design ready to help your 5.7L, 6.2L, 6.4L 2015-2023 Dodge Challenger take on any pretenders, whether on the track or the street. Exhaust kit 19206 is engineered to produce our powerful, resonant signature exhaust note at Very Aggressive exterior and Aggressive interior sound levels with an axle-back layout that replaces your vehicle's exhaust components from near the rear axle on back. Please check to ensure compliance with local noise regulations. This Dodge Challenger exhaust kit features fast-flowing mandrel bent 3in. diameter main piping that ends in a Quad Split Rear exit with 3.5in. Polished Welded-On Double Wall Angle Cut Folded Edge tips. Extensive 3D scanning during development and the use of advanced CNC precision robotic manufacturing techniques ensures that 19206's direct-fit design fits so perfectly that you can easily install the system yourself. The durable, corrosion resistant stainless steel construction of exhaust system 19206 is backed by MagnaFlow's limited lifetime warranty.

The MagnaFlow Turbo Downpipe 15399 is a 4in. diameter mandrel bent stainless steel pipe designed to connect near your turbocharger and i's weight-optimized with superior flow characteristics and performance. Each performance pipe is produced using precision CNC robotic manufacturing techniques and features 100% durable, corrosion resistant stainless steel construction. Professional installation is highly recommended.

MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 93456 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed to fit the 1982-1992 Chevrolet Camaro, 1983-1993 Chevrolet Caprice, and additional vehicles. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23-169. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2004-2009 Toyota Prius and interchanges with OE part 17410-21500. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 50884. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2001-2005 Honda Civic and 2001-2005 Acura EL, this direct-fit catalytic converter also interchanges with OE parts 18160-PLM-A00 and 18160-PLM-A50, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

The MagnaFlow 2022-2024 Ford Maverick Street Series Cat-Back Performance Exhaust System 19597 brings out the personality of your 2.0L 2022-2024 Ford Maverick with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Dual Same Side Behind Driver Rear Tire exit with 3.5in. Black Coated Welded-On Double Wall Angle Cut Folded Edge tips, this Ford Maverick exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford Maverick's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19597 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19597 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 50664. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 2004-2012 Chevrolet Colorado, 2006-2008 Hummer H3, and additional vehicles. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

The MagnaFlow D-Fit Performance Exhaust Muffler Replacement Kit With Muffler 19493 offers enthusiasts an easy way to upgrade their 2014-2023 Ram 6.4L with the deep signature sound and dyno-proven performance that MagnaFlow exhaust systems are famous for. This easy-to-install solution is designed to connect (where applicable) to the stock break points of your 6.4L truck and replaces the restrictive factory muffler with a MagnaFlow straight-through muffler while retaining the OEM piping and tailpipe. 19493?is engineered to produce Moderate exterior and Mild interior sound levels generated through its fast-flowing, mandrel bent 3.5in. main piping. This exhaust system is produced using CNC precision robotic manufacturing and features durable 100% stainless steel construction, all backed by a limited lifetime construction warranty.

The MagnaFlow Performance Exhaust Tailpipe 15463 is engineered as a universal component for your truck's exhaust system and optimized for superior flow characteristics and performance. 15463 is mandrel bent, produced using advanced CNC precision robotic manufacturing techniques and features durable, corrosion resistant stainless steel construction. Professional installation is highly recommended.

The MagnaFlow 2019-2024 Ram 1500 Street Series Cat-Back Performance Exhaust System 19430 brings out the personality of your 5.7L 2019-2024 Ram 1500 with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Dual Split Rear exit with 5in. Black Coated Welded-On Double Wall Angle Cut Rolled Edge tips, this Ram 1500 exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ram 1500's to shame. With this system your vehicle will be producing Aggressive exterior and Moderate interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19430 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19430 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.

The MagnaFlow 2001-2005 Mitsubishi Eclipse Street Series Cat-Back Performance Exhaust System 15744 brings out the personality of your 2.4L, 3.0L 2001-2005 Mitsubishi Eclipse with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.25in. main piping and 2 Straight-Through mufflers ending in a Single Straight Driver Side Rear exit with 4in. Polished Welded-On Double Wall Straight Cut Rolled Edge tips, this Mitsubishi Eclipse exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Mitsubishi Eclipse's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15744 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15744 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 444067. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2001-2005 Porsche 911. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 27405. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2003-2007 Honda Accord and interchanges with OE parts 18160-RAA-A00 and 18160-RAA-A11, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23229 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed to fit the 1986-1992 Jeep Cherokee, 1987-1992 Jeep Wrangler, and additional vehicles. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

The MagnaFlow 2009-2012 Volkswagen CC Touring Series Cat-Back Performance Exhaust System 16561 is the perfect partner for your 2.0L 2009-2012 Volkswagen CC to take on a grand tour or a weekend cruise thanks to the powerful, resonant exhaust note and dyno-proven performance it brings to the table. This durable, corrosion resistant stainless steel exhaust kit is engineered to conquer the miles with ease while enhancing your driving experience with Moderate exterior and Mild interior sound levels generated through its fast-flowing, mandrel bent 3in. main piping and 2 Straight-Through muffler that terminate in a Dual Straight Driver Side Rear exit with 3.5in. Polished Welded-On Double Wall Angle Cut Folded Edge tips. 16561 features a cat-back layout design to replace your import's stock exhaust components from the catalytic converter on back. This Volkswagen CC exhaust system is compatible with 2009-2012 engines. The use of extensive 3D scans made during the development process has resulted in an easy-to-install, direct-fit design that fits your Volkswagen CC like a glove. 16561 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's limited lifetime construction warranty.

The MagnaFlow 2024 Ford Mustang GT D-Fit Performance Exhaust Muffler Kit Without Muffler 19644 replaces the restrictive factory muffler of your 2024-2024 Ford Mustang 5.0L with fast-flowing mandrel bent 2.5in. tubing, while maintaining the OEM piping and tailpipe. Exhaust Muffler kit 19644 features a direct-fit, easy-to-install design and is produced using CNC precision robotic manufacturing techniques. This exhaust system's durable, corrosion resistant stainless steel construction is backed by MagnaFlow's limited lifetime warranty.

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 21-476. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2013-2017 Honda Accord and interchanges with OE part 18150-5A0-A00. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

The MagnaFlow Street Series Cat-Back Performance Exhaust System 19174 brings out the personality of your 6.2L 2011-2016 Ford with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3.5in. main piping and 1 Straight-Through mufflers ending in a Single Passenger Side Rear exit with 5in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Ford exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19174 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19174 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.

The MagnaFlow Street Series Cat-Back Performance Exhaust System 15269 brings out the personality of your Truck with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Dual Split Rear Behind Rear Tires exit with 4in. Polished Clamp-On Double Wall Angle Cut Rolled Edge tips, this Truck exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Truck's to shame. With this system your vehicle will be producing Aggressive exterior and Moderate interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15269 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15269 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.

The MagnaFlow 2007-2010 Ford Explorer Sport Trac Street Series Cat-Back Performance Exhaust System 16679 brings out the personality of your 4.6L 2007-2010 Ford Explorer Sport Trac with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Single Driver Side Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Ford Explorer Sport Trac exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford Explorer Sport Trac's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 16679 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 16679 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.