Enginetech BC119JSTD is a standard size main bearing set for 1995-2012 Ford, Lincoln, Mercury, Mazda 2.5L/3.0L 155-181ci V6 engines.
Important Notes:
- Standard size - for standard (unmachined) crankshaft main journals only. Measure journal diameter before installation to confirm fit.
- Always replace main bearings as a complete set. Never mix new bearings with used bearings - uneven wear and clearance differences will cause premature failure.
- Contains 1 pc. thrust washer for #4.
| Part Number | BC119JSTD |
| Bearing Size | Standard |
| Quantity Per Set | 4 main bearings per set |
| Engine | 2.5L/3.0L 155-181ci V6 |
| Year Range | 1995-2012 |
| Makes | Ford, Jaguar, Lincoln, Mazda, Mercury |
| Country of Origin | US |
| Weight | 0.75 lbs |
| UPC | 707473000000 |
| OEM Cross-Refs | ACL:4M7262A, Clevite:MS-2207A, FEL-PRO:7262MA, King Engine Bearings:MB4056SI, Topline:MBMA27 |
Complete main bearing set covering all main journals for the V6 application - one set required per engine.
Fitment:
- 1995-2000 Ford Contour 2.5L 155ci V6
- 1995-2000 Mercury Mystique 2.5L 155ci V6
- 1996-2005 Ford Taurus 3.0L 181ci V6
- 1996-2005 Mercury Sable 3.0L 181ci V6
- 1998-2000 Ford Contour 2.5L 155ci V6
- 1999-2002 Mercury Cougar 2.5L 155ci V6
- 2000-2001 Mazda MPV 2.5L 155ci V6
- 2000-2005 Lincoln LS 3.0L 181ci V6
- 2000-2008 Jaguar S-Type 3.0L 181ci V6
- 2001-2001 Mercury Cougar 2.5L 155ci V6
- 2001-2006 Mazda Tribute 3.0L 181ci V6
- 2008-2008 Mazda Tribute 3.0L 181ci V6
- 2001-2008 Ford Escape 3.0L 181ci V6
- 2002-2003 Jaguar X-Type 3.0L 181ci V6
- 2002-2006 Mazda MPV 3.0L 181ci V6
- 2003-2008 Mazda 6 3.0L 181ci V6
- 2004-2008 Jaguar X-Type 3.0L 181ci V6
- 2005-2007 Ford Five Hundred 3.0L 181ci V6
- 2005-2007 Ford Freestyle 3.0L 181ci V6
- 2005-2007 Mercury Montego 3.0L 181ci V6
- 2005-2008 Mercury Mariner 3.0L 181ci V6
- 2006-2006 Lincoln Zephyr 3.0L 181ci V6
- 2006-2009 Ford Fusion 3.0L 181ci V6
- 2006-2009 Mercury Milan 3.0L 181ci V6
- 2009-2009 Mazda Tribute 3.0L 181ci V6
- 2009-2009 Mercury Mariner 3.0L 181ci V6
- 2010-2011 Mazda Tribute 3.0L 181ci V6
- 2010-2011 Mercury Mariner 3.0L 181ci V6
- 2010-2011 Mercury Milan 3.0L 181ci V6
- 2010-2012 Ford Fusion 3.0L 181ci V6
Enginetech main bearings are engineered to OEM specifications, drawing on over 40 years of engine rebuilding expertise to deliver the precise clearance, crush, and eccentricity required for long-term durability under both stock and moderate-performance loads. Each set is application-specific: materials, wall thickness, oil clearance, and surface finish are all matched to the crankshaft main journal geometry and operating loads of the engine family it serves. Main bearings are a wear component and must be selected to match the crankshaft main journal size - bearings sized for standard journals will not seat correctly on undersize-machined journals and vice versa, so verify your journal measurement with a precision micrometer before ordering or installing. Always replace main bearings as a complete set. Mixing new bearings with used bearings produces uneven oil clearance across the crankshaft and accelerates wear on the freshly installed bearings - the small cost of a complete set is insurance against premature failure on the bearings you just paid to install. Enginetech documents every set with clear application-specific notes, journal-size designation, and cross-references so the right part lands on the bench the first time.
WARNING: This product can expose you to chemicals including lead and nickel, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
