Enginetech BC1828.50 is a 0.50mm undersize main bearing set for 1992-1997 Plymouth, Eagle, Mitsubishi 2.0L/2.4L 122ci I4 engines.
Important Notes:
- Sized for crankshaft main journals machined .50mm undersize. Measure journal diameter before installation - installing on the wrong journal size will cause immediate clearance failure.
- Always replace main bearings as a complete set. Never mix new bearings with used bearings - uneven wear and clearance differences will cause premature failure.
- Engines with 0.812 wide bearings. Standard flange width all sizes.
- Engines with 0.812 wide bearings. Thrust bearing is flanged type.
- From 5/92. 0.812 wide non flanged bearings.
- From 5/92. 0.812 wide. Std. flange width all sizes.
- Thru 4/97. with flanged thrust bearing.
| Part Number | BC1828.50 |
| Bearing Size | 0.50mm Undersize |
| Quantity Per Set | 5 main bearings per set |
| Engine | 2.0L/2.4L 122ci I4 |
| Year Range | 1992-1997 |
| Makes | Eagle, Mitsubishi, Plymouth |
| Country of Origin | IL |
| Weight | 0.75 lbs |
| UPC | 707473000000 |
| OEM Cross-Refs | ACL:5M1186, Beck/Arnley:014-6568, Clevite:MS-2039P, FEL-PRO:7348M, King Engine Bearings:MB5209AM |
Complete main bearing set covering all main journals for the I4 application - one set required per engine.
Fitment:
- 1992-1992 Eagle Talon 2.0L 122ci I4
- 1992-1992 Mitsubishi Galant 2.0L 122ci I4
- 1992-1992 Plymouth Laser 2.0L 122ci I4
- 1992-1994 Eagle Talon 2.0L 122ci I4
- 1993-1993 Mitsubishi Galant 2.0L 122ci I4
- 1993-1994 Mitsubishi Eclipse 2.0L 122ci I4
- 1993-1994 Mitsubishi Expo LRV 2.4L Noneci I4
- 1993-1994 Plymouth Colt 2.4L Noneci I4
- 1993-1994 Plymouth Laser 2.0L 122ci I4
- 1993-1995 Mitsubishi Expo 2.4L Noneci I4
- 1993-1996 Eagle Summit 2.4L Noneci I4
- 1993-1996 Mitsubishi Mighty Max 2.4L Noneci I4
- 1993-1997 Eagle Talon 2.0L 122ci I4
- 1994-1994 Mitsubishi Galant 2.4L Noneci I4
- 1994-1995 Mitsubishi Galant 2.4L Noneci I4
- 1995-1997 Mitsubishi Eclipse 2.0L 122ci I4
- 1996-1997 Mitsubishi Eclipse 2.4L Noneci I4
- 1996-1997 Mitsubishi Galant 2.4L Noneci I4
- 1997-1997 Mitsubishi Montero Sport 2.4L Noneci I4
Enginetech main bearings are engineered to OEM specifications, drawing on over 40 years of engine rebuilding expertise to deliver the precise clearance, crush, and eccentricity required for long-term durability under both stock and moderate-performance loads. Each set is application-specific: materials, wall thickness, oil clearance, and surface finish are all matched to the crankshaft main journal geometry and operating loads of the engine family it serves. Main bearings are a wear component and must be selected to match the crankshaft main journal size - bearings sized for standard journals will not seat correctly on undersize-machined journals and vice versa, so verify your journal measurement with a precision micrometer before ordering or installing. Always replace main bearings as a complete set. Mixing new bearings with used bearings produces uneven oil clearance across the crankshaft and accelerates wear on the freshly installed bearings - the small cost of a complete set is insurance against premature failure on the bearings you just paid to install. Enginetech documents every set with clear application-specific notes, journal-size designation, and cross-references so the right part lands on the bench the first time.
WARNING: This product can expose you to chemicals including lead and nickel, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
