Enginetech BC2183STD is a standard size main bearing set for 1980-1989 Nissan 2.0L-2.4L I4 engines.
Important Notes:
- Standard size - for standard (unmachined) crankshaft main journals only. Measure journal diameter before installation to confirm fit.
- Always replace main bearings as a complete set. Never mix new bearings with used bearings - uneven wear and clearance differences will cause premature failure.
- Standard flange width all sizes.
| Part Number | BC2183STD |
| Bearing Size | Standard |
| Quantity Per Set | 5 main bearings per set |
| Engine | 2.0L-2.4L I4 |
| Year Range | 1980-1989 |
| Makes | Nissan |
| Country of Origin | IL |
| Weight | 1.0 lbs |
| UPC | 707473000000 |
| OEM Cross-Refs | ACL:5M1176, Beck/Arnley:014-3933, Clevite:MS-2042P, FEL-PRO:7139M, King Engine Bearings:MB5233AM |
Complete main bearing set covering all main journals for the I4 application - one set required per engine.
Fitment:
- 1980-1981 Nissan 200SX 2.0L Noneci I4
- 1980-1981 Nissan 510 2.0L Noneci I4
- 1981-1983 Nissan 720 2.2L Noneci I4
- 1982-1983 Nissan 200SX 2.2L Noneci I4
- 1983-1985 Nissan 720 2.4L Noneci I4
- 1983-1986 Nissan 720 2.0L Noneci I4
- 1986-1986 Nissan 720 2.4L Noneci I4
- 1986-1989 Nissan D21 2.4L Noneci I4
- 1987-1987 Nissan Pathfinder 2.4L Noneci I4
- 1987-1988 Nissan Van 2.4L Noneci I4
Enginetech main bearings are engineered to OEM specifications, drawing on over 40 years of engine rebuilding expertise to deliver the precise clearance, crush, and eccentricity required for long-term durability under both stock and moderate-performance loads. Each set is application-specific: materials, wall thickness, oil clearance, and surface finish are all matched to the crankshaft main journal geometry and operating loads of the engine family it serves. Main bearings are a wear component and must be selected to match the crankshaft main journal size - bearings sized for standard journals will not seat correctly on undersize-machined journals and vice versa, so verify your journal measurement with a precision micrometer before ordering or installing. Always replace main bearings as a complete set. Mixing new bearings with used bearings produces uneven oil clearance across the crankshaft and accelerates wear on the freshly installed bearings - the small cost of a complete set is insurance against premature failure on the bearings you just paid to install. Enginetech documents every set with clear application-specific notes, journal-size designation, and cross-references so the right part lands on the bench the first time.
WARNING: This product can expose you to chemicals including lead and nickel, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
