Enginetech BC470J.50 is a 0.50mm undersize main bearing set for 1993-2014 Ford, Lincoln, Mercury 4.6L 281ci V8 engines.
Important Notes:
- Sized for crankshaft main journals machined .50mm undersize. Measure journal diameter before installation - installing on the wrong journal size will cause immediate clearance failure.
- Always replace main bearings as a complete set. Never mix new bearings with used bearings - uneven wear and clearance differences will cause premature failure.
- With iron engine block.
- W/ iron engine block.
| Part Number | BC470J.50 |
| Bearing Size | 0.50mm Undersize |
| Quantity Per Set | 5 main bearings per set |
| Engine | 4.6L 281ci V8 |
| Year Range | 1993-2014 |
| Makes | Ford, Lincoln, Mercury |
| Country of Origin | IL |
| Weight | 1.25 lbs |
| UPC | 707473000000 |
| OEM Cross-Refs | ACL:5M2007P, Clevite:MS-2007A, Clevite:MS-2007H, FEL-PRO:7292M, King Engine Bearings:MB5353SI |
Complete main bearing set covering all main journals for the V8 application - one set required per engine.
Fitment:
- 1993-2010 Mercury Grand Marquis 4.6L 281ci V8
- 1993-2011 Ford Crown Victoria 4.6L 281ci V8
- 1993-2011 Lincoln Town Car 4.6L 281ci V8
- 1994-1997 Ford Thunderbird 4.6L 281ci V8
- 1994-1997 Mercury Cougar 4.6L 281ci V8
- 1996-1996 Ford Crown Victoria 4.6L 281ci V8
- 1996-1996 Mercury Grand Marquis 4.6L 281ci V8
- 1996-2004 Ford Mustang 4.6L 281ci V8
- 1996-2005 Ford Crown Victoria 4.6L 281ci V8
- 1997-1998 Ford E-150 Econoline Club Wagon 4.6L 281ci V8
- 1997-1999 Ford E-150 Econoline 4.6L 281ci V8
- 1997-1999 Ford F-250 4.6L 281ci V8
- 1997-1999 Ford F-150 4.6L 281ci V8
- 2002-2003 Ford F-150 4.6L 281ci V8
- 1997-2000 Ford Expedition 4.6L 281ci V8
- 1997-2004 Ford Expedition 4.6L 281ci V8
- 1997-2010 Ford F-150 4.6L 281ci V8
- 1999-2002 Ford E-150 Econoline 4.6L 281ci V8
- 1999-2002 Ford E-150 Econoline Club Wagon 4.6L 281ci V8
- 2002-2005 Ford Explorer 4.6L 281ci V8
- 2002-2005 Mercury Mountaineer 4.6L 281ci V8
- 2003-2005 Ford E-150 Club Wagon 4.6L 281ci V8
- 2003-2014 Ford E-150 4.6L 281ci V8
- 2003-2014 Ford E-250 4.6L 281ci V8
- 2004-2004 Ford F-150 Heritage 4.6L 281ci V8
- 2006-2011 Ford Crown Victoria 4.6L 281ci V8
- 2006-2011 Lincoln Town Car 4.6L 281ci V8
- 2006-2011 Mercury Grand Marquis 4.6L 281ci V8
Enginetech main bearings are engineered to OEM specifications, drawing on over 40 years of engine rebuilding expertise to deliver the precise clearance, crush, and eccentricity required for long-term durability under both stock and moderate-performance loads. Each set is application-specific: materials, wall thickness, oil clearance, and surface finish are all matched to the crankshaft main journal geometry and operating loads of the engine family it serves. Main bearings are a wear component and must be selected to match the crankshaft main journal size - bearings sized for standard journals will not seat correctly on undersize-machined journals and vice versa, so verify your journal measurement with a precision micrometer before ordering or installing. Always replace main bearings as a complete set. Mixing new bearings with used bearings produces uneven oil clearance across the crankshaft and accelerates wear on the freshly installed bearings - the small cost of a complete set is insurance against premature failure on the bearings you just paid to install. Enginetech documents every set with clear application-specific notes, journal-size designation, and cross-references so the right part lands on the bench the first time.
WARNING: This product can expose you to chemicals including lead and nickel, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
