Enginetech R34048-040 is a cast .040" oversize piston ring set for 1967-1973 Dodge, Plymouth, Buick 5.6L/6.6L 340-400ci V8 engines, sold as a complete set covering all cylinders.
Important Notes:
- Sized for cylinders bored .040 inch oversize. Verify your finished bore diameter with a precision gauge before ordering - rings sized for the wrong bore will not seal correctly.
- File-fit and gap each ring to the manufacturer's end-gap specification for your application before installation. Improper end gap causes blow-by or ring-end butting under heat.
- Replace piston rings as a complete set during any rebuild. One set covers all cylinders for the engine.
- Cast. 5/64 5/64 3/16.
| Part Number | R34048-040 |
| Grade | Cast |
| Bore Size | .040" Oversize |
| Ring Stack (Top/2nd/Oil) | 5/64 / 5/64 / 3/16 |
| Standard Bore Diameter | 4.040 in |
| Quantity | Complete set - covers all 8 cylinders |
| Engine | 5.6L/6.6L 340-400ci V8 |
| Year Range | 1967-1973 |
| Makes | Buick, Dodge, Plymouth |
| Country of Origin | US |
| OEM Cross-Refs | Hastings:694, FEL-PRO:E-286X, Perfect Circle:50787 |
Sold as a complete piston ring set - one set covers all cylinders and is required per engine.
Fitment:
- 1967-1967 Buick Gran Sport 6.6L 400ci V8
- 1967-1967 Buick Skylark 6.6L 400ci V8
- 1968-1968 Buick GS 400 6.6L 400ci V8
- 1968-1968 Buick Skylark 6.6L 400ci V8
- 1968-1968 Buick Sportwagon 6.6L 400ci V8
- 1968-1968 Plymouth Road Runner 5.6L 340ci V8
- 1968-1973 Dodge Dart 5.6L 340ci V8
- 1968-1973 Plymouth Barracuda 5.6L 340ci V8
- 1968-1973 Plymouth Satellite 5.6L 340ci V8
- 1968-1973 Plymouth Valiant 5.6L 340ci V8
- 1969-1969 Buick GS 400 6.6L 400ci V8
- 1969-1969 Buick Sportwagon 6.6L 400ci V8
- 1970-1971 Plymouth Duster 5.6L 340ci V8
- 1970-1973 Dodge Challenger 5.6L 340ci V8
- 1970-1973 Dodge Charger 5.6L 340ci V8
- 1970-1973 Dodge Coronet 5.6L 340ci V8
- 1970-1973 Plymouth Cuda 5.6L 340ci V8
- 1970-1973 Plymouth Duster 5.6L 340ci V8
- 1971-1971 Plymouth Belvedere 5.6L 340ci V8
- 1971-1971 Plymouth Road Runner 5.6L 340ci V8
- 1971-1973 Plymouth Road Runner 5.6L 340ci V8
- 1972-1973 Dodge Polara 5.6L 340ci V8
Enginetech piston ring sets are manufactured to OEM specifications and offered in both premium and cast grades to match the demands of stock rebuilds and moderate-performance builds. Each set is application-specific, with ring widths and end-gap characteristics matched to the bore and groove geometry of the engine family it serves. Ring sets are sold by bore size - standard for unmachined bores, with oversizes for blocks that have been bored and honed - so verify your finished bore diameter with a precision gauge before ordering, since rings sized for the wrong bore will not seal correctly. Always file-fit and gap each ring to the manufacturer's specification for your application, and replace rings as a complete set during any rebuild. Enginetech documents every set with the ring stack dimensions, bore size, and cross-references so the correct set reaches the bench the first time.
WARNING: This product can expose you to chemicals including lead and nickel, which are known to the State of California to cause cancer, birth defects, or other reproductive harm.
