Enginetech R43058-030 is a cast .030" oversize piston ring set for 1968-1976 Cadillac 7.7L/8.2L 472-500ci V8 engines, sold as a complete set covering all cylinders.
Important Notes:
- Sized for cylinders bored .030 inch oversize. Verify your finished bore diameter with a precision gauge before ordering - rings sized for the wrong bore will not seal correctly.
- File-fit and gap each ring to the manufacturer's end-gap specification for your application before installation. Improper end gap causes blow-by or ring-end butting under heat.
- Replace piston rings as a complete set during any rebuild. One set covers all cylinders for the engine.
- Cast. 5/64 5/64 3/16.
| Part Number | R43058-030 |
| Grade | Cast |
| Bore Size | .030" Oversize |
| Ring Stack (Top/2nd/Oil) | 5/64 / 5/64 / 3/16 |
| Standard Bore Diameter | 4.300 in |
| Quantity | Complete set - covers all 8 cylinders |
| Engine | 7.7L/8.2L 472-500ci V8 |
| Year Range | 1968-1976 |
| Makes | Cadillac |
| Country of Origin | US |
| OEM Cross-Refs | Hastings:685, FEL-PRO:E260X, Perfect Circle:50850 |
Sold as a complete piston ring set - one set covers all cylinders and is required per engine.
Fitment:
- 1968-1968 Cadillac Eldorado 7.7L 472ci V8
- 1968-1969 Cadillac Eldorado 7.7L 472ci V8
- 1968-1974 Cadillac Calais 7.7L 472ci V8
- 1968-1974 Cadillac Commercial Chassis 7.7L 472ci V8
- 1968-1974 Cadillac DeVille 7.7L 472ci V8
- 1968-1974 Cadillac Fleetwood 7.7L 472ci V8
- 1969-1969 Cadillac Eldorado 7.7L 472ci V8
- 1970-1976 Cadillac Eldorado 8.2L 500ci V8
- 1975-1976 Cadillac Calais 8.2L 500ci V8
- 1975-1976 Cadillac Commercial Chassis 8.2L 500ci V8
- 1975-1976 Cadillac DeVille 8.2L 500ci V8
- 1975-1976 Cadillac Fleetwood 8.2L 500ci V8
Enginetech piston ring sets are manufactured to OEM specifications and offered in both premium and cast grades to match the demands of stock rebuilds and moderate-performance builds. Each set is application-specific, with ring widths and end-gap characteristics matched to the bore and groove geometry of the engine family it serves. Ring sets are sold by bore size - standard for unmachined bores, with oversizes for blocks that have been bored and honed - so verify your finished bore diameter with a precision gauge before ordering, since rings sized for the wrong bore will not seal correctly. Always file-fit and gap each ring to the manufacturer's specification for your application, and replace rings as a complete set during any rebuild. Enginetech documents every set with the ring stack dimensions, bore size, and cross-references so the correct set reaches the bench the first time.
WARNING: This product can expose you to chemicals including lead and nickel, which are known to the State of California to cause cancer, birth defects, or other reproductive harm.
