Enginetech S82124-.50 is a premium .50mm oversize piston ring set for 1996-2012 Hyundai, Kia 1.8L/2.0L I4 engines, sold as a complete set covering all cylinders.
Important Notes:
- Sized for cylinders bored .50mm oversize. Verify your finished bore diameter with a precision gauge before ordering - rings sized for the wrong bore will not seal correctly.
- File-fit and gap each ring to the manufacturer's end-gap specification for your application before installation. Improper end gap causes blow-by or ring-end butting under heat.
- Replace piston rings as a complete set during any rebuild. One set covers all cylinders for the engine.
- Pistons w/ 2.5mm oil rings. Premium. Steel top. 1.2 / 1.2 / 2.5mm.
| Part Number | S82124-.50 |
| Grade | Premium |
| Bore Size | .50mm Oversize |
| Ring Stack (Top/2nd/Oil) | 1.20 / 1.20 / 2.50 |
| Standard Bore Diameter | 3.228 in |
| Quantity | Complete set - covers all 4 cylinders |
| Engine | 1.8L/2.0L I4 |
| Year Range | 1996-2012 |
| Makes | Hyundai, Kia |
| Country of Origin | US |
| OEM Cross-Refs | Hastings:2C4943, Topline:RSHY5, Safety Auto Parts Corp:2C4943, DNJ:PR124 |
Sold as a complete piston ring set - one set covers all cylinders and is required per engine.
Fitment:
- 1996-1997 Hyundai Elantra 1.8L I4
- 1997-1997 Hyundai Sonata 2.0L I4
- 1997-1997 Hyundai Tiburon 1.8L I4
- 1998-1998 Hyundai Elantra 1.8L I4
- 1999-2001 Hyundai Elantra 2.0L I4
- 2003-2005 Hyundai Tiburon 2.0L I4
- 2004-2007 Kia Spectra 2.0L I4
- 2005-2005 Hyundai Tucson 2.0L I4
- 2005-2007 Kia Spectra5 2.0L I4
- 2005-2008 Kia Sportage 2.0L I4
- 2006-2006 Hyundai Tiburon 2.0L I4
- 2006-2009 Hyundai Tucson 2.0L I4
- 2007-2008 Hyundai Tiburon 2.0L I4
- 2007-2012 Hyundai Elantra 2.0L I4
- 2008-2009 Kia Spectra 2.0L I4
- 2008-2009 Kia Spectra5 2.0L I4
- 2009-2010 Kia Sportage 2.0L I4
- 2010-2010 Kia Sportage 2.0L I4
- 2010-2011 Kia Soul 2.0L I4
Enginetech piston ring sets are manufactured to OEM specifications and offered in both premium and cast grades to match the demands of stock rebuilds and moderate-performance builds. Each set is application-specific, with ring widths and end-gap characteristics matched to the bore and groove geometry of the engine family it serves. Ring sets are sold by bore size - standard for unmachined bores, with oversizes for blocks that have been bored and honed - so verify your finished bore diameter with a precision gauge before ordering, since rings sized for the wrong bore will not seal correctly. Always file-fit and gap each ring to the manufacturer's specification for your application, and replace rings as a complete set during any rebuild. Enginetech documents every set with the ring stack dimensions, bore size, and cross-references so the correct set reaches the bench the first time.
WARNING: This product can expose you to chemicals including lead and nickel, which are known to the State of California to cause cancer, birth defects, or other reproductive harm.
