Enginetech BB175J.25 is a .25mm undersize connecting rod bearing set for 2011-2024 Dodge, Chrysler, Ram, Jeep 3.6L 220ci V6 engines.
Important Notes:
- Sized for crankshaft rod journals machined .25mm undersize. Measure journal diameter before installation - installing on the wrong journal size will cause immediate clearance failure.
- Always replace rod bearings as a complete set. Never mix new bearings with used bearings - uneven wear and clearance differences will cause premature failure.
| Part Number | BB175J.25 |
| Bearing Size | .25mm Undersize |
| Quantity Per Set | 6 pairs (12 bearings) per set |
| Engine | 3.6L 220ci V6 |
| Year Range | 2011-2024 |
| Makes | Chrysler, Dodge, Jeep, Ram, Volkswagen, Winnebago |
| Country of Origin | IL |
| Weight | .75 lbs |
| UPC | 707473987691 |
| OEM Cross-Refs | Clevite:CB-1957A, King Engine Bearings:CR6857SM, MAHLE:CB-1957A, DNJ:RB1169 |
Complete set covers all 6 connecting rod journals for the V6 application - one set required per engine.
Fitment:
- 2011-2014 Dodge Avenger 3.6L 220ci V6
- 2011-2014 Volkswagen Routan 3.6L 220ci V6
- 2011-2015 Dodge Durango 3.6L 220ci V6
- 2011-2015 Jeep Grand Cherokee 3.6L 220ci V6
- 2011-2016 Chrysler Town & Country 3.6L 220ci V6
- 2011-2017 Chrysler 200 3.6L 220ci V6
- 2011-2019 Dodge Journey 3.6L 220ci V6
- 2011-2020 Dodge Grand Caravan 3.6L 220ci V6
- 2011-2021 Chrysler 300 3.6L 220ci V6
- 2011-2021 Dodge Challenger 3.6L 220ci V6
- 2011-2021 Dodge Charger 3.6L 220ci V6
- 2012-2014 Ram C/V 3.6L 220ci V6
- 2012-2017 Jeep Wrangler 3.6L 220ci V6
- 2013-2018 Ram 1500 3.6L 220ci V6
- 2014-2018 Winnebago Trend 3.6L 220ci V6
- 2014-2019 Winnebago Travato 3.6L 220ci V6
- 2014-2021 Ram ProMaster 2500 3.6L 220ci V6
- 2014-2021 Ram ProMaster 3500 3.6L 220ci V6
- 2015-2021 Ram ProMaster 1500 3.6L 220ci V6
- 2017-2021 Chrysler Pacifica 3.6L 220ci V6
- 2018-2018 Jeep Grand Cherokee 3.6L 220ci V6
- 2018-2018 Jeep Wrangler JK 3.6L 220ci V6
- 2019-2021 Ram 1500 3.6L 220ci V6
- 2019-2021 Ram 1500 Classic 3.6L 220ci V6
- 2019-2024 Jeep Wrangler 3.6L 220ci V6
- 2022-2022 Jeep Grand Cherokee WK 3.6L 220ci V6
Enginetech rod bearings are engineered to OEM specifications, drawing on over 40 years of engine rebuilding expertise to deliver the precise clearance, crush, and eccentricity required for long-term durability under both stock and moderate-performance loads. Each set is application-specific: materials, wall thickness, oil clearance, and surface finish are all matched to the connecting rod journal geometry and operating loads of the engine family it serves. Rod bearings are a wear component and must be selected to match the crankshaft journal size - bearings sized for standard journals will not seat correctly on undersize-machined journals and vice versa, so verify your journal measurement with a precision micrometer before ordering or installing. Always replace rod bearings as a complete set. Mixing new bearings with used bearings produces uneven oil clearance across cylinders and accelerates wear on the freshly installed bearings - the small cost of a complete set is insurance against premature failure on the bearings you just paid to install. Enginetech documents every set with clear application-specific notes, journal-size designation, and cross-references so the right part lands on the bench the first time.
WARNING: This product can expose you to chemicals including lead and nickel, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
