The Fel-Pro 60102 is a carburetor mounting gasket that seals the carburetor base to the intake manifold, sealing the fuel-air mixture passage at the carburetor mounting flange on the applications listed below, restoring a clean sealing surface for a reliable, air-tight seal.
| Brand | Fel-Pro |
| Part Number | 60102 |
| Product Type | Carburetor Mounting Gasket |
| UPC | 084113803871 |
| Shipping Dimensions | 9 x 6.5 x 0.02 in, 0.08 lb |
Vehicle Fitment:
- 1970-1970 Dodge P200
- 1972-1972 Jeep Commando - Carburetor To Insulator
- 1965-1969 Jeep Gladiator
- 1965-1972 Jeep J-100 - Carburetor To Insulator
- 1965-1972 Jeep J-2500 - Carburetor To Insulator
- 1965-1972 Jeep J-2600 - Carburetor To Insulator
- 1965-1970 Jeep J-2700
- 1965-1967 Jeep J-2800
- 1965-1970 Jeep J-3500
- 1965-1970 Jeep J-3600
- 1965-1970 Jeep J-3700
- 1965-1971 Jeep J-3800 - Carburetor To Insulator
- 1971-1981 Jeep CJ5 - Carburetor To Insulator, Insulator To Intake Manifold
- 1971-1975 Jeep CJ6 - Carburetor To Insulator, Insulator To Intake Manifold
- 1976-1981 Jeep CJ7 - Insulator To Intake Manifold
- 1974-1983 Jeep Cherokee - Insulator To Intake Manifold
- 1984-1991 Jeep Grand Wagoneer - Insulator To Intake Manifold
- 1974-1988 Jeep J10 - Insulator To Intake Manifold
- 1974-1988 Jeep J20 - Insulator To Intake Manifold
- 1965-1983 Jeep Wagoneer - Carburetor To Insulator, Insulator To Intake Manifold
- 1965-1965 Jeep J-210
- 1965-1965 Jeep J-220
- 1965-1965 Jeep J-230
- 1965-1965 Jeep J-300
- 1965-1965 Jeep J-310
Important Notes:
- Clean the carburetor base and manifold flange, and verify the gasket bolt pattern and bore against your carburetor before ordering.
- A fresh base gasket helps cure vacuum leaks and rough idle; check the carburetor mounting studs and nuts while the carb is off.
WARNING: WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or reproductive harm.
