The Enginetech EB026-4 is a set of bronze (copper/lead alloy) piston pin bushings supplied as a 4 pack. Fits 1990-2014 Saab/Subaru 1.8L/2.0L/2.2L+ applications.
Important Notes
- Sold as a 4 Pack - one complete set for an L4 engine. Order additional packs for multiple engines.
- Supplied semi-finished on the inside diameter: the bushing ID must be final-reamed or honed to match the wrist pin after pressing into the connecting rod small end. This is a standard machine-shop operation and establishes the running clearance on the pin.
- Bronze (copper/lead alloy) construction matches OE material spec for durability and anti-seizure performance under high cyclic loads at the rod small end.
- Direct OEM cross-reference replacement - see the OEM Cross-References section below for matching part numbers.
- Always verify the OE bushing ID, OD, length, and rod part number against the original bushing being replaced before installation. Dimensions vary across engine families even when sharing similar makes or displacements.
Specifications
| Part Number | EB026-4 |
| Product Type | Piston Pin Bushing |
| Material | Bronze (copper/lead alloy) |
| Inside Diameter | Semi-finished (ream to fit) |
| Pack Count | 4 |
| Weight | 0.25 lbs |
| UPC | 707473000253 |
| Country of Origin | TW |
| OEM Cross-References | Topline: PBSU9, DNJ: PB715 |
Vehicle Fitment
- 1990-1995 Subaru Legacy 2.2L 4-cyl SOHC [VIN:6]
- 1991-1994 Subaru Legacy 2.2L 4-cyl SOHC [VIN:6] Turbocharged
- 1993-1997 Subaru Impreza 1.8L 4-cyl SOHC [VIN:2]
- 1995 Subaru Impreza 2.2L 4-cyl SOHC [VIN:6]
- 1996 Subaru Impreza 1.8L 4-cyl SOHC [VIN:1]
- 1996 Subaru Legacy 2.2L 4-cyl SOHC [VIN:3]
- 1996-1997 Subaru Impreza 2.2L 4-cyl SOHC [VIN:4]
- 1996-1998 Subaru Legacy 2.2L 4-cyl SOHC [VIN:4]
- 1996-1998 Subaru Legacy 2.5L 4-cyl DOHC
- 1997-1998 Subaru Impreza 2.2L 4-cyl SOHC [VIN:4]
- 1997-1999 Subaru Legacy 2.2L 4-cyl SOHC [VIN:4]
- 1998 Subaru Forester 2.5L 4-cyl DOHC [VIN:6]
- 1998 Subaru Impreza 2.5L 4-cyl DOHC [VIN:6]
- 1999 Subaru Legacy 2.5L 4-cyl DOHC
- 1999, 2005-2011 Subaru Impreza 2.5L 4-cyl SOHC
- 1999-2001 Subaru Impreza 2.2L 4-cyl SOHC [VIN:4]
- 2000 Subaru Legacy 2.5L 4-cyl SOHC
- 2000 Subaru Legacy 2.5L 4-cyl SOHC [VIN:6]
- 2000 Subaru Outback 2.5L 4-cyl SOHC
- 2000 Subaru Outback 2.5L 4-cyl SOHC [VIN:6]
- ...and 12 additional applications
Enginetech Piston Pin Bushings are a copper/lead alloy bronze, cast to OE-equivalent specification for connecting rod small-end service. These bushings are supplied semi-finished on the inside diameter, meaning the ID must be final-reamed or honed to match the wrist pin after the bushing has been pressed into the rod - a standard rebuild-shop operation that ensures a precise running clearance on the piston pin. Each part number is engineered against the specific rod, pin, and bushing seat geometry of the listed applications, so cross-reference verification against the OEM part number is essential before installation.
WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer, birth defects, or other reproductive harm.
