Enginetech part number IM2488 is a direct-replacement intake valve for 1984-2004 Infiniti/Nissan/Ford 3.0L, 3.3L applications. Key specifications: 1.654" head, 0.2744" stem, 4.941" overall length, nitrided stem.
Important Notes
- Nitride-hardened stem surface resists wear and galling in high-temperature and high-load applications.
- Always verify head diameter, stem diameter, and overall valve length against the OE valve being replaced before installation. Valve dimensions vary across engine families - a visual match is not enough.
Specifications
| Part Number | IM2488 |
| Valve Type | Intake Valve |
| Head Diameter | 1.654" |
| Stem Diameter | 0.2744" (7.00mm nominal) |
| Valve Length | 4.941" OAL |
| Stem Finish | Nitrided Stem |
| Number of Grooves | 1 |
| Weight | 1.50 lbs |
| OEM Cross-Refs | AC Clevite: 252322, Beck Arnley: 0213256, Beck Arnley: 021-3256, DNJ Rock: IV616, Elgin: I2488, Elgin: I-2488 |
Vehicle Fitment
- 1990-1992 Infiniti 3.0L / 2960 SOHC V6 12V VG30E
- 1984-1989 Nissan 3.0L / 2960 SOHC V6 12V VG30T, VG30ET Turbo
- 1985-1994 Nissan 3.0L / 2960 SOHC V6 12V VG30, VG30E VG30i
- 1993-1998 FORD 3.0L / 2960 SOHC V6 12V "1,W" Nissan
- 1999-2002 FORD 3.3L / 3275 SOHC V6 12V "T" Nissan
- 1987-1998 Nissan 3.0L / 2960 SOHC V6 12V VG30, VG30E, VG30i
- 1996-2004 Nissan 3.3L / 3275 SOHC V6 12V VG33E Nat. Asp.
- 2001-2004 Nissan 3.3L / 3275 SOHC V6 12V VG33ER S/C
Product Video
Watch the Enginetech intake valve overview: https://youtu.be/G487Dw8HtII
Watch the Enginetech intake valve overview: https://youtu.be/eLaQHop7rH8
Enginetech standard valves are stock-replacement engine valves produced from OE grade materials or better, engineered with the production engine rebuilder in mind. Face runout, stem finish, and stem diameter tolerances are held to some of the tightest standards in the internal engine parts industry, and every valve is inspected by on-site engineers against a documented quality plan before it leaves the plant. The line covers domestic, import, and common high-performance applications across a full range of head diameters, stem diameters, and overall lengths, with chrome-plated and nitride-hardened stem finishes available where the engine's operating conditions call for the upgrade. Always verify head diameter, stem diameter, valve length, groove count, and any oversize stem requirement against the original valve being replaced before installing, as multiple valve configurations can share the same vehicle nameplate.
WARNING: This product can expose you to chemicals including lead and nickel, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
