Enginetech part number V2692B is a direct-replacement intake valve supplied as a rebuilder 25-pack for 1994-2014 GM/Chevrolet/Isuzu/Workhorse 4.3L, 5.7L applications. Key specifications: 1.940" head, 0.3411" stem, 4.880" overall length, chrome stem.
Important Notes
- Sold as a rebuilder bulk pack: 25 valves per box. Intended for production engine rebuilders; order accordingly for your job volume.
- Select applications are specific to engine VIN codes: P. Verify the eighth character of your VIN against the fitment data before ordering.
- Chrome-plated stem provides a hard, low-friction wear surface for extended service life.
- Always verify head diameter, stem diameter, and overall valve length against the OE valve being replaced before installation. Valve dimensions vary across engine families - a visual match is not enough.
Specifications
| Part Number | V2692B |
| Valve Type | Intake Valve |
| Head Diameter | 1.940" |
| Stem Diameter | 0.3411" (11/32" nominal) |
| Valve Length | 4.880" OAL |
| Stem Finish | Chrome Stem |
| Number of Grooves | 1 |
| Pack Count | 25 (bulk / rebuilder pack) |
| Weight | 1.50 lbs |
Vehicle Fitment
- 1996-2014 GM 4.3L / 262 OHV V6 12V Vortec Chev.
- 1994-1997 GM 5.7L / 350 OHV V8 16V Chev.
- 1996-2014 GM, CHEVROLET 4.3L / 262 OHV V6 12V Vortec Chev.
- 1996-2002 GM, CHEVROLET 5.7L / 350 OHV V8 16V Chev.
- 1997-1999 Isuzu 4.3L / 4293 OHV V6 12V "X,W" GM
- 1996-2014 Workhorse 4.3L / 262 OHV V6 12V Vortec Chev.
Product Video
Watch the Enginetech intake valve overview: https://youtu.be/G487Dw8HtII
Watch the Enginetech intake valve overview: https://youtu.be/eLaQHop7rH8
Enginetech standard valves are stock-replacement engine valves produced from OE grade materials or better, engineered with the production engine rebuilder in mind. Face runout, stem finish, and stem diameter tolerances are held to some of the tightest standards in the internal engine parts industry, and every valve is inspected by on-site engineers against a documented quality plan before it leaves the plant. The line covers domestic, import, and common high-performance applications across a full range of head diameters, stem diameters, and overall lengths, with chrome-plated and nitride-hardened stem finishes available where the engine's operating conditions call for the upgrade. Always verify head diameter, stem diameter, valve length, groove count, and any oversize stem requirement against the original valve being replaced before installing, as multiple valve configurations can share the same vehicle nameplate.
WARNING: This product can expose you to chemicals including lead and nickel, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
